| Electronic Components Datasheet Search |
|
83C145 Datasheet(PDF) 16 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
83C145 Datasheet(HTML) 16 Page - NXP Semiconductors |
|
16 / 40 page ![]() 1996 Mar 22 16 Philips Semiconductors Product specification Microcontrollers for TV and video (MTV) 83C145; 83C845 83C055; 87C055 13 ON SCREEN DISPLAY (OSD) Figure 7 shows the OSD block diagram. It shows the CPU writing into the 128 × 10 display RAM, which is dual-ported to allow the CPU to write into it at any time, including when it is being read out by the OSD logic. The 10-bit wide data coming out of the display RAM is used to access the appropriate character in the Character Generator memory (6-bits) and to specify character and display control functions (4-bits). Timing for the OSD is controlled by the HSYNC, VSYNC, and dot clock input VCLK1. 13.1 OSD features The 83C055 features an advanced OSD function with some unique features as described in Sections 13.1.1 to 13.1.10. 13.1.1 USER-DEFINABLE DISPLAY FORMAT The OSD does not restrict the user to a fixed number of lines with a fixed number of characters per line: • Using a fixed number of lines restricts the generation of displays that can be differentiated from others that use the same chip and places limits on screen content. • Using a fixed number of characters per line wastes display RAM if a line has less than the full number of displayable characters (it has to be padded with non-visible characters). The OSD on the 83C055 defines a control character: • New Line, that has the same function as a Carriage Return and Line Feed. When the OSD circuitry fetches this character from display RAM it stops displaying further characters, waits for the next horizontal scan line, and starts displaying the next character in display RAM after the New Line character was received. The number of lines is thus up to the user, within the limits of the display and memory, as are the number of characters per line. This allows far better control of the appearance of the OSD. 13.1.2 COLOURS SELECTABLE BY CHARACTER Characters can be displayed on a background of the base video or a programmable background colour. The background colour is selectable by word and the choice of background (base video/user programmed colour) by character. 13.1.3 DUAL-PORTED DISPLAY RAM The OSD has a true display RAM instead of a character line buffer. This display RAM is dual-ported to allow updating the display RAM at any time instead of having to wait for a vertical retrace. Vertical Sync (VSYNC) interrupts are supported if flicker-free updates are required. 13.1.4 PROGRAMMABLE CHARACTER SIZE • Normal characters are displayed as 18 × 14 bit maps. • In an interlaced display: – 2 fields are displayed so that one actually sees a 36 × 14 pixel size character. – The part has a double height and width mode which displays 36 × 28 pixel size bit maps per field. • For use in non-interlaced systems, the part has a double height mode so that the displayed characters have the same pixel size (36 × 14) as on an interlaced display. 13.1.5 CHARACTER SHADOWING When characters are displayed overlaid on a background of base video, a black border around the characters makes them highly legible. This feature is called shadowing. The 83C055 has 8 shadowing modes to allow the user to select various partial shadow modes as well as full surround shadow; see Fig.8 and Table 28. 13.1.6 PROGRAMMABLE POLARITIES Inputs to and outputs from the OSD can be programmed to be recognized as active LOW or HIGH. In conjunction with the 12 V outputs, this allows direct interfacing to most video signal processing circuits. 13.1.7 CHARACTER GENERATOR MEMORY IN EPROM On the 87C055, the Character Generator memory is in EPROM. This feature allows quick and inexpensive font development and refinement against the alternative of creating a masked ROM version to see how the final fonts will appear. 13.1.8 HSYNC LOCKED DOT CLOCK OSCILLATOR The 83C055 is designed to use an LC oscillator circuit that is started at the trailing edge of HSYNC and stopped at its leading edge. In practice, this gives a highly consistent delay from HSYNC to oscillator start and is stable from scan line to scan line so that no left margin effects are seen. |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |