PM5366 datasheet(72/267 Pages) PMC

72 / 267 page

PRELIMINARY

PM5366 TEMAP-84

DATASHEET

PMC-2010672

ISSUE 1

HIGH DENSITY 84/63 CHANNEL VT/TU MAPPER

AND M13 MULTIPLEXER

PROPRIETARY AND CONFIDENTIAL

Notes on Pin Descriptions:

1. All TEMAP-84 inputs and bi-directionals present minimum capacitive loading

and operate at TTL logic levels.

2. All TEMAP-84 outputs and bi-directionals have at least 2 mA drive capability.

The bidirectional data bus outputs, D[7:0], have 4 mA drive capability. The

outputs TCLK[3:1], TPOS/TDAT[3:1], TNEG/TMFP[3:1],

RGAPCLK/RSCLK[3:1], RDATO[3:1], RFPO/RMFPO[3:1], ROVRHD[3:1],

TFPO/TMFPO/TGAPCLK[3:1], SBIACT, LAOE/LATPL, RECVCLK1,

RECVCLK2 and INTB have 4 mA drive capability. The SBI outputs and

telecom bus outputs, SDDATA[7:0], SDDP, SDPL, SDV5, SAJUST_REQ,

SAC1FP, LAV5, LAC1J1V1, LADATA[7:0], LADP and LAPL, have 8mA drive

capability. The bidirectional SBI signal SDC1FP has 8mA drive capability.

3. Inputs CSB, RSTB, ALE, TMS, TDI and TRSTB have internal pull-up

resistors.

4. Input A[12] has an internal pull-down resistor.

5. All unused inputs should be connected to GROUND.

6. Power to the VDD3.3 pins should be applied before power to the VDD1.8

pins is applied. Similarly, power to the VDD1.8 pins should be removed

before power to the VDD3.3 pins is removed.

PM5366 Datasheet(PDF) 72 Page - PMC-Sierra, Inc