| Electronic Components Datasheet Search |
|
TLK6002 Datasheet(PDF) 30 Page - Texas Instruments |
|
|
|
|||||||||||||||||||||||||||||
TLK6002 Datasheet(HTML) 30 Page - Texas Instruments |
|
30 / 96 page ![]() TXAN TXAP TDA_[ 19: 0] Channel A Parallelto Serial TXCLK_A Channel A RXAP RXAN RDA_[ 19: 0] Serialto Parallel COMMA Detect & 8B/ 10 B Decoding RXCLK_A TXBN TXBP TDB_[ 19: 0] Channel B Parallelto Serial TXCLK_B Channel B RXBP RXBN RDB_[ 19: 0] Serialto Parallel COMMA Detect & 8B/ 10 B Decoding RXCLK_B TLK6002 SLLSE34 – MAY 2010 www.ti.com Figure 2-11. TLK6002 – Serial Retime Mode of Operation 2.19 Latency Measurement Function The TLK6002 includes a round trip latency measurement function to support CPRI and OBSAI base station applications. The elapsed time from a comma (either encoded or unencoded) detected in the transmit direction of a particular channel to a comma detected in the receive direction of the same channel is measured and reported through the MDIO interface (TDA_[19:0] → RDA_[19:0] -or- TDB_[19:0] → RDB_[19:0]). The function operates on one channel at a time. When 8b/10b encoding/decoding is enabled, the following three control characters (containing commas) are monitored: 1. K28.1 (control = 1, data = 0x3C) 2. K28.5 (control = 1, data = 0xBC) 3. K28.7 (control = 1, data = 0xFC). When 8b/10b encoding/decoding is disabled, the lower 7 bits of the Tx and Rx data stream are monitored for either positive (7’b0011111) or negative (7’b1100000) comma characters. Whether 8b/10b encoding/decoding is enabled or not, comma detection in the receive datapath must be enabled (register bit 3.7). The result of this measurement is readable through the MDIO interface through a 20-bit register. The accuracy of the measurement is a function of the serial bit rate which the channel being measured is operating at. The register will return a value of 0xFFFFF if the duration between transmit and receive comma detection exceeds the depth of the counter. Only one measurement value is stored internally until the 20-bit results counter is read. The counter will return zero in cases where a transmit comma was never detected (indicating the results counter never began counting). 30 Description Copyright © 2010, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): TLK6002 |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |