| Electronic Components Datasheet Search |
|
WM8850 Datasheet(PDF) 31 Page - Wolfson Microelectronics plc |
|
|
|||||||||||||||||||||||||||||
WM8850 Datasheet(HTML) 31 Page - Wolfson Microelectronics plc |
|
31 / 223 page ![]() Pre-Production WM8850 w PP, April 2011, Rev 3.2 31 BANDWIDTH CONFLICTS Sections 5.3.2.2 and 5.3.3.3 of the HD Audio spec describe the scenario of over-subscription of SDO and SDI bandwidths. It indicates that the final stream on the link is terminated prior to completion, and further behaviour is undefined. SDO It is possible that the SDO line could be oversubscribed, if all streams are active at their maximum sample rate, and word length. It is the responsibility of the Controller to handle this situation, and determine what is put on the SDO line during oversubscription. The WM8850 will produce unsolicited responses from the converter nodes that have not received the stream packets that they have been configured for. SDI The WM8850 invokes a protection mechanism, should a bandwidth over-subscription situation arise. The mechanism monitors the sample rate, and sample-size settings of a stream to detect oversubscription. If the SDI line is over-subscribed, due to software configuration or configuration from the recovered S/PDIF sample-rate, the stream (or streams) assigned the highest Stream ID tag value, will be dropped, and an unsolicited response issued from the stream converter whose stream has been dropped. A stream will be restarted on a re-issue of a non-zero stream ID. However, should the bandwidth problem still be present, the stream won’t start and an unsolicited response will be re-sent. Although there is a protection mechanism in the WM8850, it is the responsibility of the user to identify and rectify bandwidth problems. SOFTWARE FORMATTED (RAW) S/PDIF An S/PDIF sub-frame consists of a preamble, 24-bits of audio data, and four control bits. In Software Formatted (Raw) S/PDIF mode, all 24-bits of the audio data, plus the 4 bits of control information, plus a 4-bit encoding of the preamble (taking the last 4-bits of the 8-bit bi-phase encoded preamble) are transported across the link. Software Formatted S/PDIF mode is selected by setting the Bits register in the Stream Format Verb to 4h (i.e. 32-bits) and setting the Type register to 1. SOURCE SYNCHRONOUS INPUT - S/PDIF RX Extra Bandwidth Section 5.4.3 of the HDA specification describes how source synchronous inputs should be handled. Note: Source synchronous handling is only required when SRC1 is bypassed. When the incoming sampling rate is slightly higher that the nominal stream sampling rate extra data transmission is required. The HDA specification states “the CODEC may insert one or more additional complete sample blocks on the link, either within its normal allocated stream packet (making it larger than the nominal allocated size) or by creating a second stream packet within the frame.” The WM8850 implements the first option, and will insert additional samples (in left/right pairs) within the stream packet. The Data Length field within the Stream tag will be updated to show that the stream packet contains additional samples. If additional samples cannot be accommodated on SDI due to bandwidth problems, the additional samples are dropped, and an unsolicited response is issued from the S/PDIF Rx Converter Node with EF_STREAM_DROP set to 01h. |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |