82563EB datasheet(7/52 Pages) INTEL

7 / 52 page

82563EB/82564EB Gigabit Platform LAN Connect Networking Silicon

1.0

Introduction

The Intel® 82563EB Gigabit Platform LAN Connect is a dual, compact Physical Layer

Transceiver (PHY) component designed for 10/100/1000 Mb/s operation. This device uses the

Kumeran interface port of the 631xESB/632xESB I/O Controller Hub enabling the routing of long

distances up to 28 inches (~711 mm). The 82564EB Gigabit Platform LAN Connect is the single

port implementation. The Intel® 82563EB and 82564EB allow for Gigabit Ethernet

implementations in a very small package; easing routing constraints from the 631xESB/632xESB

I/O Controller Hub to the PHY.

The Intel® 82563EB/82564EB devices are based upon proven PHY technology integrated into

Intel’s Gigabit Ethernet Controllers. The physical layer circuitry provides a standard IEEE 802.3

Ethernet interface for 1000BASE-T, 100BASE-TX, and 10BASE-T applications (802.3, 802.3u,

and 802.3ab). The 82563EB/82564EB devices are capable of transmitting and receiving data at

rates of 1000 Mb/s, 100 Mb/s, or 10 Mb/s.

1.1

Document Scope

This document contains datasheet specifications for the 82563EB/82564EB Gigabit Platform LAN

Connect, including signal descriptions, DC and AC parameters, packaging data, and pinout

information.

1.2

Reference Documents

This document assumes that the designer is acquainted with high-speed design and board layout

techniques. The following documents provide application information:

• 82563EB/82564EB LAN on Motherboard Design Guide (AP-467), Intel Corporation.

• 82563EB/82564EB Gigabit Platform LAN Connect Specification Update, Intel Corporation.

• 631xESB/632xESB I/O Controller Hub EEPROM Information Guide Application Note (AP-

477), Intel Corporation.

• 82571/82572/ESB2 LAN System Manageability Application Note (AP-497), Intel Corporation.

• IEEE Standard 1149.1, 2001 Edition (JTAG). Institute of Electrical and Electronics Engineers

(IEEE).

• IEEE Standard 802.3, 2002 Edition. Incorporates various IEEE Standards previously

published separately. Institute of Electrical and Electronic Engineers (IEEE).

• Intel® 631xESB/632xESB I/O Controller Hub External Design Specification (EDS), Volumes

1-3, Intel Corporation.

• Bensley/Bensley-VS Platform Design Guide (PDG), Intel Corporation.

• PICMG3.1 Ethernet/Fiber Channel Over PICMG 3.0 Draft Specification, September 4, 2002,

Version 0.90. PCI Industrial Computer Manufacturers Group (PICMG).

Software driver developers should contact their local Intel Representatives for programming

information.

82563EB Datasheet(PDF) 7 Page - Intel Corporation