IMX7SCEC datasheet(2/155 Pages) NXP

2 / 155 page

i.MX 7Solo introduction

i.MX 7Solo Family of Applications Processors Datasheet, Rev. 7, 09/2023

NXP Semiconductors

The i.MX 7Solo family of processors is specifically useful for applications such as:

• Audio

• Connected devices

• Access control panels

• Human-machine interfaces (HMI)

• Portable medical and health care

• IP phones

• Smart appliances

• Point of Sale

• eReaders

• Wearables

• Home energy management systems

The features of the i.MX 7Solo family of processors include the following:

• Arm Cortex-A7 plus Arm Cortex-M4—Heterogeneous Multicore Processing architecture enables

the device to run an open operating system like Linux/Android on the Cortex-A7 core and an RTOS

like FreeRTOS™ on the Cortex-M4 core.

• Arm Cortex-A7 core—The processor enhances the capabilities of portable, connected applications

by fulfilling the ever-increasing MIPS needs of operating systems and applications at lowest power

consumption levels per MHz.

• Multilevel memory system—The multilevel Cortex-A7 memory system is based on the L1

instruction and data caches, L2 cache, and internal and external memory. The processor supports

many types of external memory devices, including DDR3, DDR3L, LPDDR2 and LPDDR3, NOR

Flash, NAND Flash (MLC and SLC), QSPI Flash, and managed NAND, including eMMC rev.

• Power efficiency—Power management implemented throughout the IC enables features and

peripherals to consume minimum power in both active and various low-power modes.

• Multimedia—The multimedia performance is enhanced by a multilevel cache system, NEON™

MPE (Media Processor Engine) coprocessor, a programmable smart DMA (SDMA) controller.

• Gigabit Ethernet with AVB—10/100/1000 Mbps Ethernet controllers supporting IEEE Std 1588

time synchronization.

• Human-machine interface (HMI)—i.MX 7Solo processor provides up to two separate display

interfaces (parallel display and two-lane MIPI-DSI), CMOS sensor interface (two-lane MIPI-CSI

and parallel).

• Interface flexibility—i.MX 7Solo processor supports connections to a variety of interfaces: one

high-speed USB on-the-go module with PHY, High-Speed Inter-Chip USB, multiple expansion

card ports (high-speed MMC/SDIO host and other), a Gigabit Ethernet controller with support for

Ethernet AVB, two 12-bit ADCs with a total of 8 single-ended inputs, two CAN ports, and a variety

of other popular interfaces (such as UART, I2C, and I2S).

• Advanced security—The processors deliver hardware-enabled security features that enable secure

e-commerce, digital rights management (DRM), information encryption, secure boot, and secure

IMX7SCEC Datasheet(PDF) 2 Page - NXP Semiconductors

IMX7SCEC Datasheet(HTML) 2 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL