TMPR4956C datasheet(27/286 Pages) TOSHIBA

27 / 286 page

Handling Precautions

Packing Type

Moisture Removal Applicability/Procedure

Tray

If the packing indicates a “Heatproof” or temperature label, bake at 125

°C for 20

hours. (Some devices may require a different amount of time.)

If the packing does not indicate a “Heatproof” or temperature label, transfer the

devices to an anti-static container that bears a “Heatproof” or temperature label

and then bake.

The moisture-proof package itself is not heat resistance. Be sure to remove the

devices from the package prior to baking.

Magazine

Transfer devices to antistatic containers bearing the “Heatproof” or temperature

label, and then bake at 125

°C for 20 hours. (Some devices may require a different

amount of time.)

The moisture-proof package itself is not heat resistance. Be sure to remove the

devices from the package prior to baking.

Tape

Transfer devices to antistatic containers bearing the “Heatproof” or temperature

label, and then bake at 125

°C for 20 hours. (Some devices may require a different

amount of time.)

The moisture-proof package itself is not heat resistance. Be sure to remove the

devices from the package prior to baking.

(4) When removing the moisture from the devices, protect the devices from breakdown from static electricity.

(5) Moisture indicators (for your reference)

Moisture indicators detect the approximate ambient humidity level at a standard temperature of 25

°C.

Figure 3.1 shows a 3-point indicator.

READ AT LAVENDER

BETWEEN PINK & BLUE

HUMIDITY INDICATOR

3-point indicator

Figure 3.1 Humidity Indicator

(6) Do not allow loads to be applied directly to devices while they are in storage.

TMPR4956C Datasheet(PDF) 27 Page - Toshiba Semiconductor