TCM4400EPET datasheet(24/64 Pages) TI

24 / 64 page

TCM4400E

GSM/DCS BASEBAND AND VOICE A/D

AND D/A RF INTERFACE CIRCUIT

SLWS082A – JULY 1999 – REVISED MARCH 2000

POST OFFICE BOX 655303

• DALLAS, TEXAS 75265

PARAMETER MEASUREMENT INFORMATION

voiceband serial interface timing considerations

Figure 5 shows the timing diagram for both transmit and receive voiceband serial interface operation.

The signal VCLK is the output serial clock used to control the transmission or reception of the data (see

Figure 5). The transmitted serial data (VDX) is the serial data output; the frame synchronization (VFS) is used

to initiate the transfer of transmit and receive data. The received data (VDR) is the serial data input.

Each serial port includes four registers that include the data transmit register (DXR), the data receive register

(DRR), the transmit shift register (XSR), and the receive shift register (RSR).

The voice serial interface has the same structure and timing diagram as the serial interface; one extra cycle is

generated before VFS, and two extra cycles are generated after the LSB.

XLOAD and RLOAD are internal signals.

VCLK

tsu7

th6

tsu8

th8

VFS

VDX

XLOAD

A15

A14

A13

A12

MSB

LSB

DXR

Loaded

XSR

Loaded

a. Audio-Serial-Port Transmit Operation

VCLK

tsu9

th7

VFS

VDR

RLOAD

A15

A14

A13

A12

MSB

LSB

DDR

Loaded

b. Audio-Serial-Port Receive Operation

Figure 5. Voiceband Serial Interface Timing Waveforms

TCM4400EPET Datasheet(PDF) 24 Page - Texas Instruments

TCM4400EPET Datasheet(HTML) 24 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64

Datasheet Download

Link URL