 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
PC8374L Datasheet(PDF) 148 Page - National Semiconductor (TI) |
|
|
|
|||||||||||||||||||||||||||||
PC8374L Datasheet(HTML) 148 Page - National Semiconductor (TI) |
|
|
148 / 239 page  8.0 Health Management (HM) (Continued) www.national.com 148 Revision1.1 8.4.9 HM Sensor Status Register 2 (HMSENS_STS2) Sensor status register 2. Note: All status bits in this register are reset when START bit of the Configuration register is reset. Power Well: VSB3 Location: Offset 08h Type: RO Bit 76543210 Name DEV2_STS RD_STS FAN4_STS FAN3_STS FAN2_STS FAN1_STS DEV1_STS 12V_STS Reset 0 0 0 0 0 0 0 0 Bit Description 7 DEV2_STS. Is set to 1 when a communication problem with the optional LM95010 device exists. 0: The optional LM95010 device does not exist or exists with valid communication (default) 1: A communication problem with LM95010 6 RD_STS. Is set to 1 when there is a physical connection fault in one of the Remote Diodes of the Temperature Zones occur (for LM96011: Zone1; for LM96010 or LM96012: Zone1 or Zone3). 0: Proper connection of Remote Diode (default) 1: Remote Diode connection fault 5 FAN4_STS. Is set to 1 when Fan 4 is either stalled or running at low speed (according to the FSTLMD bit in the associated Extended FANPWM Control register; see Section 8.5.85 on page 190). 0: Fan operating normally (default) 1: Fan is either stalled or running at low speed 4 FAN3_STS. Is set to 1 when Fan 3 is either stalled or running at low speed (according to the FSTLMD bit in the associated Extended FANPWM Control register). 0: Fan operating normally (default) 1: Fan is either stalled or running at low speed 3 FAN2_STS. Is set to 1 when Fan 2 is either stalled or running at low speed (according to the FSTLMD bit in the associated Extended FANPWM Control register). 0: Fan operating normally (default) 1: Fan is either stalled or running at low speed 2 FAN1_STS. Is set to 1 when Fan 1 is either stalled or running at low speed (according to the FSTLMD bit in the associated Extended FANPWM Control register). 0: Fan operating normally (default) 1: Fan is either stalled or running at low speed 1 DEV1_STS. Is set to 1 when a communication problem with the LM96011, LM96010 or LM96012 device exists. 0: Communication with LM96011, LM96010 or LM96012 is functional (default) 1: Communication problem with LM96011, LM96010 or LM96012 0 12V_STS. Is set to 1 when 12V input voltage exceeds the limits. 0: Voltage not does not exceed any respective limit (default) 1: Voltage exceeds a respective limit Winbond Electronics Corp. Advanced PC Product Center |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
