How To Reach Us

Home Page:

nxp.com

Web Support:

nxp.com/support

Limited warranty and liability — Information in this document is believed to be accurate and reliable. However,

NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or

completeness of such information and shall have no liability for the consequences of use of such information. NXP

Semiconductors takes no responsibility for the content in this document if provided by an information source outside

of NXP Semiconductors. In no event shall NXP Semiconductors be liable for any indirect, incidental, punitive, special

or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related

to the removal or replacement of any products or rework charges) whether or not such damages are based on tort

(including negligence), warranty, breach of contract or any other legal theory.

Notwithstanding any damages that customer might incur for any reason whatsoever, NXP Semiconductors’ aggregate

and cumulative liability towards customer for the products described herein shall be limited in accordance with the

Terms and conditions of commercial sale of NXP Semiconductors.

Right to make changes - NXP Semiconductors reserves the right to make changes to information published in this

document, including without limitation specifications and product descriptions, at any time and without notice. This

document supersedes and replaces all information supplied prior to the publication hereof.

Security — Customer understands that all NXP products may be subject to unidentified or documented vulnerabilities.

Customer is responsible for the design and operation of its applications and products throughout their lifecycles to

reduce the effect of these vulnerabilities on customer’s applications and products. Customer’s responsibility also

extends to other open and/or proprietary technologies supported by NXP products for use in customer’s applications.

NXP accepts no liability for any vulnerability. Customer should regularly check security updates from NXP and follow

up appropriately.

Customer shall select products with security features that best meet rules, regulations, and standards of the intended

application and make the ultimate design decisions regarding its products and is solely responsible for compliance

with all legal, regulatory, and security related requirements concerning its products, regardless of any information or

support that may be provided by NXP. NXP has a Product Security Incident Response Team (PSIRT) (reachable

at PSIRT@nxp.com) that manages the investigation, reporting, and solution release to security vulnerabilities of

NXP products.

NXP, the NXP logo, NXP SECURE CONNECTIONS FOR A SMARTER WORLD, Freescale, the Freescale logo,

CodeWarrior, Layerscape, QorIQ, are trademarks of NXP B.V. All other product or service names are the property

of their respective owners. AMBA, Arm, Arm7, Arm7TDMI, Arm9, Arm11, Artisan, big.LITTLE, Cordio, CoreLink,

CoreSight, Cortex, DesignStart, DynamIQ, Jazelle, Keil, Mali, Mbed, Mbed Enabled, NEON, POP, RealView,

SecurCore, Socrates, Thumb, TrustZone, ULINK, ULINK2, ULINK-ME, ULINK-PLUS, ULINKpro, µVision, Versatile

are trademarks or registered trademarks of Arm Limited (or its subsidiaries) in the US and/or elsewhere. The related

technology may be protected by any or all of patents, copyrights, designs and trade secrets. All rights reserved.

© NXP B.V. 2020.

All rights reserved.

For more information, please visit: http://www.nxp.com

For sales office addresses, please send an email to: salesaddresses@nxp.com

Date of release: 12/2020

Document identifier: RF112L0H