| Electronic Components Datasheet Search |
|
PTIOL221RGER Datasheet(PDF) 7 Page - Texas Instruments |
|
|
|||||||||||||||||||||||||||||
PTIOL221RGER Datasheet(HTML) 7 Page - Texas Instruments |
|
7 / 54 page ![]() 5.6 Electrical Characteristics (continued) Over recommended operating conditions and recommended free-air temperature range (unless otherwise noted). Typical values are at LP = 24 V, VVOUT = 3.3 V and TA = 25 ℃ unless otherwise specified. PARAMETER TEST CONDITIONS MIN TYP MAX UNIT UVVOUT3F Falling UV threshold on VOUT (3.3V setting) VSEL connected to GND or Floating(V5IN supplied), VOUT falling 2.5 2.7 2.9 V UVVOUT3R Rising UV threshold on VOUT (3.3V setting) VSEL connected to GND or Floating(V5IN supplied), VOUT rising 2.6 2.8 3.0 V PSSR Power Supply Rejection Ratio 100 kHz, I(VCC_OUT) = 20 mA 40 dB DRIVER OUTPUT (CQ, DO) RDSON-HS High-side driver on-resistance ILOAD = 200 mA, Current Limit = 300 mA 2.5 4.5 Ω RDSON-LS Low-side driver on-resistance ILOAD = 200 mA, Current Limit = 300 mA 2.5 4.5 Ω IO(LIM) Driver output current limit SPI/PIN = LOW V(DRIVER)= (VLP - 3) V or 3V, RSETx = 110 kΩ 35 55 70 mA RSETx = 10 kΩ 300 350 400 mA RSETx = 0 to 5 kΩ 500 mA RSETx = OPEN 260 330 400 mA IO(LIM) Driver output current limit SPI/PIN = HIGH, V(DRIVER)= (VLP - 3) V or 3V, 3h[7:6]= 0h 35 60 75 mA 3h[7:6]= 1h 50 75 95 mA 3h[7:6]= 2h 100 140 175 mA 3h[7:6]= 3h 150 190 260 mA 3h[7:6]= 4h 200 230 330 mA 3h[7:6] = 5h 250 290 410 mA 3h[7:6] = 6h 300 350 485 mA 3h[7:6]= 7h 500 700 mA IOZ(CQ) CQ leakage EN1 = LOW, 0 ≤ V(CQ) ≤ (V(LP) - 0.1 V) –2 2 µA ILLM(CQ) CQ load discharge current EN1 = LOW, RSET1 = 0 to 5 kΩ (1), V(CQ) >= 5 V 5 8.5 15 mA ILLM(DO) DO load discharge current EN2 = LOW, RSET2 = 0 to 5 kΩ; V(DO) >= 5 V 5 8.5 15 mA IPU-DO DO driver weak pull-up current SPI/PIN=HIGH, EN2=LOW, TX2=HIGH, RSET2: 10 kΩ to 110 kΩ AND Weak pull- up enabled (SPI mode only) 0 ≤ V(DO) ≤ (V(LP) - 2 V) 40 50 80 µA IPD-DO DO driver weak pull-down current (SPI/PIN=HIGH, EN2=LOW, TX2=LOW, RSET2: 10 kΩ to 110 kΩ AND Weak pull-up enabled (SPI mode only) 2 ≤ V(DO) ≤ V(LP) 40 50 80 µA IPU-CQ CQ driver weak pull-up current Driver disabled, Weak pull-up enabled (SPI mode) 0 ≤ V(CQ) ≤ (V(LP) - 2 V) 40 50 80 µA IPD-CQ CQ driver weak pull-down current Driver disabled, Weak pull-down enabled (SPI mode) 2 ≤ V(CQ) ≤ V(LP) 40 50 80 µA RECEIVER INPUT (CQ, DI) V(THH) Input threshold “H” V(LP) > 18 V, EN= LOW 10.5 13 V V(THL) Input threshold “L" 8 11.5 V V(HYS) Receiver Hysteresis (V(THH) - V(THL)) 0.75 V V(THH) Input threshold “H” V(LP) < 18 V, EN= LOW See Note (2) See Note (3) V V(THL) Input threshold “L" V(LP) < 18 V, EN= LOW See Note (4) See Note (5) V V(HYS) Receiver Hysteresis (V(THH) - V(THL)) 0.75 V CIN-CQ CQ input capacitance CQ driver disabled, weak pull-up/ pull-down disabled, f =100kHz 150 pF CIN-DI DI input capacitance f =100kHz 100 pF www.ti.com TIOL221 SLLSFS6 – SEPTEMBER 2024 Copyright © 2024 Texas Instruments Incorporated Submit Document Feedback 7 Product Folder Links: TIOL221 |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |