| Electronic Components Datasheet Search |
|
21150 Datasheet(PDF) 1 Page - Intel Corporation |
|
|
|||||||||||||||||||||||||||||
21150 Datasheet(HTML) 1 Page - Intel Corporation |
|
1 / 164 page ![]() 21150 PCI-to-PCI Bridge Preliminary Datasheet Product Features 1.For 21150-AB and later revisions only. The 21150-AA does not implement this feature. s Complies fully with the PCI Local Bus Specification, Revision 2.1 s Complies fully with the Advanced Configuration Power Interface (ACPI) Specification s Complies fully with the PCI Power Management Specification, Revision 1.01 s Complies fully with Revision 1.0 of the PCI-to-PCI Bridge Architecture Specification s Implements delayed transactions for all PCI configuration, I/O, and memory read commands—up to three transactions simultaneously in each direction s Allows 88 bytes of buffering (data and address) for posted memory write commands in each direction—up to five posted write transactions simultaneously in each direction s Allows 72 bytes of read data buffering in each direction s Provides concurrent primary and secondary bus operation, to isolate traffic s Provides 10 secondary clock outputs with the following features: — Low skew permits direct drive of option slots — Individual clock disables, capable of automatic configuration during reset s Provides arbitration support for nine secondary bus devices: — A programmable 2-level arbiter — Hardware disable control, to permit use of an external arbiter s Provides a 4-pin general-purpose I/O interface, accessible through device- specific configuration space s Provides enhanced address decoding: — A 32-bit I/O address range — A 32-bit memory-mapped I/O address range — A 64-bit prefetchable memory address range — ISA-aware mode for legacy support in the first 64KB of I/O address range — VGA addressing and VGA palette snooping support s Includes live insertion support s Supports PCI transaction forwarding for the following commands: — All I/O and memory commands — Type 1 to Type 1 configuration commands — Type 1 to Type 0 configuration commands (downstream only) — All Type 1 to special cycle configuration commands s Includes downstream lock support s Supports both 5-V and 3.3-V signaling environments s Available in both 33 MHz and 66 MHz versions s Provides an IEEE standard 1149.1 JTAG interface. Order Number: 278106-002 July 1998 Notice: This document contains preliminary information on new products in production. The specifications are subject to change without notice. Verify with your local Intel sales office that you have the latest datasheet before finalizing a design. |
Similar Part No. - 21150 |
|
Similar Description - 21150 |
|
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |