AN3165

Safety and operating instructions

Doc ID 17180 Rev 1

7/31

1.5

Board operation

It is advised to use an AC insulated and protected against overloads and short-circuits

during the evaluation test of the system (compliance with technical equipment and accident

prevention rules).

A correct load able to dissipate, or in any case absorb and reuse, the power delivered by the

system must be used. In the case of a resistive and dissipative dummy load, attention

should be given to the temperature that the load could reach. Ensure the necessary

equipment is provided to avoid hot surfaces and risk of fire during the tests (fan, water

cooled load, etc).

Note:

Do not touch the board or its components after disconnection from the voltage supply as

several parts and power terminals which contain possibly energized capacitors need to be

given time to discharge.