| Electronic Components Datasheet Search |
|
ADFS5758 Datasheet(PDF) 1 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
ADFS5758 Datasheet(HTML) 1 Page - Analog Devices |
|
1 / 75 page ![]() Single-Channel, 16-Bit, Current/Voltage Output DAC, Functional Safety Approved for Unipolar Current Output Data Sheet ADFS5758 Rev. 0 Document Feedback Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibilityisassumedbyAnalogDevicesforitsuse,norforanyinfringementsofpatentsorother rightsofthirdpartiesthatmayresultfromitsuse.Specificationssubjecttochangewithoutnotice.No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 ©2020 Analog Devices, Inc. All rights reserved. Technical Support www.analog.com FEATURES Functional safety approved to SIL 2/SC3 for unipolar current output by TÜV Rheinland, File Number 968/FSP 2055.00/20 Current/voltage output available on a single terminal Current output ranges: 0 mA to 20 mA, 4 mA to 20 mA, 0 mA to 24 mA, ±20 mA, ±24 mA, −1 mA to +22 mA Voltage output ranges (with 20% overrange): 0 V to 5 V, 0 V to 10 V, ±5 V, and ±10 V Advanced on-chip diagnostics 12-bit ADC functioning as an independent monitoring function that can validate the output and accuracy. On-chip reference DPC for thermal management User-programmable offset and gain Robust architecture, including output fault protection EMC test standards IEC 61000-4-6 conducted immunity (10 V, Class A) IEC 61000-4-3 radiated immunity (20 V/m, Class A) IEC 61000-4-2 ESD (±6 kV contact, Class B) IEC 61000-4-4 electrical fast transient (EFT) (±4 kV, Class B) IEC 61000-4-5 surge (±4 kV, Class B) CISRP 11 radiated emissions (Class B) 32-lead, 5 mm × 5 mm LFCSP −40°C to +105°C temperature range APPLICATIONS Process control Actuator control Channel isolated analog outputs Programmable logic controller (PLC) and distributed control system (DCS) applications HART network connectivity GENERAL DESCRIPTION The ADFS5758 is a single-channel, 16-bit, current/voltage output DAC. The device is functional safety approved for unipolar current output and is a fully compliant item with a systematic capability of SC3, which can be used in safety-related applications up to SIL 2, according to IEC 61508. This arrangement allows a single ADFS5758 to be used to achieve SIL 2 for a nonredundant configuration. The safe state for the ADFS5758 is open circuit/high impedance. The ADFS5758 is a single-channel, voltage and current output digital-to-analog converter (DAC) that operates with a power supply range from −33 V minimum on AVSS to +33 V maximum on AVDD1 with a maximum operating voltage between the two rails of 60 V. On-chip dynamic power control (DPC) minimizes package power dissipation, which is achieved by regulating the supply voltage (VDPC+) to the VIOUT output driver circuitry from 4.95 V to 27 V using a buck dc-to-dc converter, optimized for minimum on-chip power dissipation. The CHART pin enables a HART® signal to be coupled onto the current output. The device uses a versatile 4-wire serial peripheral interface (SPI) that operates at clock rates of up to 50 MHz and is compatible with standard SPI, QSPI™, MICROWIRE™, DSP, and microcontroller interface standards. The interface also features an optional SPI cyclic redundancy check (CRC) and a windowed watchdog timer. The ADFS5758 offers improved diagnostic features from its predecessors, such as an integrated independent 12-bit diagnostic analog-to-digital converter (ADC) that can be used to digitize both internal and external nodes. PRODUCT HIGHLIGHTS 1. Functional safety approved to SIL 2/SC3 by TÜV Rheinland. 2. Range of advanced diagnostic features, including an integrated ADC for high reliability. 3. DPC using an integrated buck dc-to-dc converter for thermal management. When used with the ADP1031, the ADFS5758 enables eight channel to channel isolated outputs at <2 W dissipated power. 4. Programmable power control (PPC) mode to enable faster settling time (15 µs typical). 5. Highly robust with output protection from miswire events (±38 V). COMPANION PRODUCTS Product Family: AD5755-1, AD5422, AD5758, AD5753, AD5423 HART Modem: AD5700, AD5700-1 External References: ADR431, ADR3425, ADR4525 Digital Isolators: ADuM142D, ADuM141D Power: ADP1031, LT8300, ADP2360, ADM6339 |
Similar Part No. - ADFS5758 |
|
Similar Description - ADFS5758 |
|
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |