| Electronic Components Datasheet Search |
|
STPMIC25 Datasheet(PDF) 92 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STPMIC25 Datasheet(HTML) 92 Page - STMicroelectronics |
|
92 / 145 page ![]() 6.5 Power supply control registers 6.5.1 BUCKx MAIN mode control register 1 (BUCKx_MAIN_CR1) (x = 1 to 7) 7 6 5 4 3 2 1 0 reserved VOUT[6:0] R R/W R/W R/W R/W R/W R/W R/W • Address: 0x20/0x25/0x2A/0x2F/0x34/0x39/0x3E • Default: 0b0XXXXXXX where X depends on the value programmed in the NVM • Description: BUCK1 to BUCK7 MAIN mode control register 1. This register is initialized to the default value in the CHECK&LOAD state. The user can write to these registers to set the voltage of BUCKx, which is applied to the MAIN mode (see Section 5.4.6 and 0 BUCKconverter). [7] reserved [6:0] VOUT[6:0]: Buck output voltage settings. See Table 25. BUCK output voltage settings. The default value is defined in the BUCKx_VOUT[2:0] bit field of NVM_BUCKs_VOUT_SHRx NVM shadow registers. 6.5.2 BUCKx MAIN mode control register 2 (BUCKx_MAIN_CR2) (x = 1 to 7) Table 55. BUCKx_MAIN_CR2 7 6 5 4 3 2 1 0 reserved reserved reserved reserved reserved PREG_MODE[1:0] EN R R R R R R/W R/W R/W • Address: 0x21/0x26/0x2B/0x30/0x35/0x3A/0x3F • Default: 0b00000XXX where X depends on the value programmed in NVM • Description: BUCK1 to BUCK7 MAIN mode control register 2. This register is initialized to the default value in the CHECK&LOAD state. The user can write to these registers to control the enable and regulation modes of BUCKx, which are applied to the MAIN mode (see Section 5.4.6 and 0 BUCKconverter). [7:3] reserved [2:1 PREG_MODE: select regulation mode 00: BUCKx operates in high power mode (HP) 01: BUCKx operates in low power mode (LP) 10: BUCKx operates in forced PWM mode (CCM) 11: reserved [0] EN: 0: BUCKx is disabled 1: BUCKx is enabled The default value is defined in the BUCKx_RANK[2:0] bit field of NVM_BUCKs_RANK_SHR NVM shadow registers. If BUCKx_RANK[2:0] = 0, BUCKx is disabled at power up; if BUCKx_RANK[2:0] = y (with 6 > y > 0) BUCKx is enabled at power up at rank y (see Section 5.2) STPMIC25 Register descriptions DS14278 - Rev 3 page 92/145 |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |