IRCC datasheet(26/79 Pages) SMSC

26 / 79 page

MASTER BLOCK CONTROL REGISTER

The Master Block Control Register contains the

IrCC Power Down bit, two reset bits, the Master

Interrupt Enable bit, and the Register Block

Select lines (Table 14).

Address seven is solely reserved for the Master

Block Control register. If the nSCE input is zero,

the MBC is always visible, regardless of the state

of the Register Block Select lines.

Table 14 - SCE Master Block Control Register

Address

Direction

Description

Default

R/W

Master Block Control Register

'00'hex

power

down

master

reset

master

int en.

error

reset

select

The Register Block Select bits enable access to

each of the eight possible register blocks. To

access a register block other than the default (0),

write a 3-bit register block number to the least

significant bits of the Master Block Control

All subsequent reads and writes to

addresses 0 through 6 will access the registers in

the new block. To return to register block 0,

rewrite zeros to the register block select bits.

Error Reset, bit 4

Writing a one to the Error Reset bit will return all

of the SCE Line Status Register bits (Register

Block Zero) to their inactive states and reset the

Message Count bits to zero.

Master Interrupt Enable, bit 5

Setting the Master Interrupt Enable to a one

enables all of the SCE interrupts only if their

individual controls are enabled. Setting this bit to

a zero disables all SCE interrupts regardless of

the state of their individual enables.

Master Reset, bit 6

Setting the Master Reset bit to a one forces data

in the SCE registers and SCE logical blocks into

the Power-On-Reset state. The Master Reset bit

is reset to zero following the reset operation.

NOTE: The Legacy bits (Register Block One,

Address Zero, Bits D0-D6) are unaffected by

Master Reset.

Power Down, bit 7

Setting this bit to a one causes only the SCE to

enter the low-power state. Power down mode

does not preclude access to the Master Block

Control register so that this mode can be

maintained entirely under software control.

IRCC Datasheet(PDF) 26 Page - SMSC Corporation

IRCC Datasheet(HTML) 26 Page - SMSC Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79

Datasheet Download

Link URL