Electronic Components Datasheet Search
  English  ▼

X  

AD9681 Datasheet(PDF) 40 Page - Analog Devices

Part # AD9681
Description  1.8 V Analog-to-Digital Converter
PDF  41 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
Manufacturer  AD [Analog Devices]
Direct Link  http://www.analog.com
Logo AD - Analog Devices

AD9681 Datasheet(HTML) 40 Page - Analog Devices

Back Button AD9681 Datasheet HTML 33Page - Analog Devices AD9681 Datasheet HTML 34Page - Analog Devices AD9681 Datasheet HTML 35Page - Analog Devices AD9681 Datasheet HTML 36Page - Analog Devices AD9681 Datasheet HTML 37Page - Analog Devices AD9681 Datasheet HTML 38Page - Analog Devices AD9681 Datasheet HTML 39Page - Analog Devices AD9681 Datasheet HTML 40Page - Analog Devices AD9681 Datasheet HTML 41Page - Analog Devices  
Zoom Inzoom in Zoom Outzoom out
 40 / 41 page
background image
Data Sheet
AD9681
Rev. C | Page 39 of 40
CLOCK STABILITY CONSIDERATIONS
When powered on, the AD9681 goes into an initialization phase
where an internal state machine sets up the biases and the registers
for proper operation. During the initialization process, the AD9681
needs a stable clock. If the ADC clock source is not present or not
stable during ADC power-up, the state machine is disrupted and
the ADC starts up in an unknown state. To correct this, reinvoke
an initialization sequence after the ADC clock is stable by issuing
a digital reset using Register 0x08. In the default configuration
(internal VREF, ac-coupled input) where VREF and VCM are supplied
by the ADC itself, a stable clock during power-up is sufficient.
When VREF or VCM is supplied by an external source, it, too, must
be stable at power-up. Otherwise, a subsequent digital reset, using
Register 0x08, is needed. The pseudocode sequence for a digital
reset follows:
SPI_Write (0x08, 0x03); # digital reset
SPI_Write (0x08, 0x00); # normal operation
VCM
Decouple the VCMx pin to ground with a 0.1 μF capacitor.
REFERENCE DECOUPLING
Decouple the VREF pin externally to ground with a low ESR,
1.0 μF capacitor in parallel with a low ESR, 0.1 μF ceramic
capacitor.
SPI PORT
Ensure that the SPI port is inactive during periods when the full
dynamic performance of the converter is required. Because the
SCLK, CSB1, CSB2, and SDIO signals are typically asynchronous
to the ADC clock, noise from these signals can degrade converter
performance. If the on-board SPI bus is used for other devices,
it may be necessary to provide buffers between this bus and the
AD9681 to prevent these signals from transitioning at the converter
inputs during critical sampling periods.



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41


Datasheet Download

Go To PDF Page


Link URL



Does ALLDATASHEET help your business so far?  [ DONATE ] 

About Alldatasheet   |   Advertisement   |   Contact us   |   Privacy Policy   |   Link to Datasheet    |   Link Exchange   |   Manufacturer List
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com