R200 datasheet(37/51 Pages) INTEL

Part #	R200

Description	Embedded Infrared Assisted Stereovision 3D Imaging System with Color Camera

PDF	51 Pages

Scroll/Zoom	100%

Manufacturer	INTEL [Intel Corporation]

Direct Link	http://www.intel.com

Logo

37 / 51 page

System Integration

334616-001

7.10.1

Cable TX to RX Crossover

Standard USB3.0 requires the cable to cross the host TX to the device RX and the host

RX to the device TX. For the R200 module, it is recommended not to cross over the

signals in the cable to allow cable wiring to be flat and as thin as possible. The

modules do not cross over the TX and RX signals, it is necessary to do this on the

platform motherboard.

Figure 7-15. Example of Host Platform Motherboard Routing

7.10.2

Power Gate Circuit

It is required that the host platform is able to gate power to the R200 module. The

power gate must be controllable via an ACPI and BIOS controllable GPIO. It is

recommended for the implementation to be able to vary the delay from when the

GPIO is asserted to when the ACPI code notifies the OS the device is powered.

R200 Datasheet(PDF) 37 Page - Intel Corporation