R2000 datasheet(7/75 Pages) ETC

7 / 75 page

Indy® R2000 Electrical, Mechanical, & Thermal Specification

2.2

Reference Documents

The Indy R2000 reader chip is fully compliant with the protocol specifications provided in Table 2, as well as with the

local regulations referenced in Table 3.

Table 2: Protocol Specification Documents

Document

iPico, iP-X: Universal RFID protocol standard V1.07 July 2005

ISO/IEC FDIS 18000-6B Sept. 2004

ISO/IEC FDIS 18000-63 Jan. 2005

Table 3: Local Regulation Documents

Document

FCC 47 CFR Ch. 1, part 15

ETSI EN 302 208-1 V1.4.1

Table 4 lists supplemental information sources for the Indy R2000 reader chip. These can all be found in the R2000

Development Kit files, which are available on support.impinj.com here.

Table 4: Supplemental Documents

Document

Indy Development Platform Operation

Indy Firmware Datasheet

Indy Host Library API Reference Manual

Indy Host Interface Packet Definitions

Indy OEM Configuration

Indy Host Library SDK Getting Started Guide

Indy MAC Command Definitions

Indy MAC Register Set Definitions

2.3

About This Document

This document constitutes the electrical, mechanical, and thermal specifications for the Indy R2000 reader chip. It

contains a functional overview, mechanical data, package signal locations, and targeted electrical specifications.

2.4

Indy R2000 Reader Chip Diagrams

Figure 2-1 provides a top level block diagram of the RF/analog parts of the Indy R2000 reader chip. The architecture

is based on direct conversion for both the transmitter and receiver.

Figure 2-2 shows the R2000 sheet of the schematic for the R2000 Development Kit. Additional components such as

the host microprocessor, PA, filters, etc. are contained in other sheets. This is shown as a representative example of

how to integrate the R2000 into a design. For more details, see the kit documentation on support.impinj.com here.

R2000 Datasheet(PDF) 7 Page - List of Unclassifed Manufacturers