| Electronic Components Datasheet Search |
|
ADT7467ARQZ-R7 Datasheet(PDF) 32 Page - ON Semiconductor |
|
|
|||||||||||||||||||||||||||||
ADT7467ARQZ-R7 Datasheet(HTML) 32 Page - ON Semiconductor |
|
32 / 77 page ![]() ADT7467 Rev. 3 | Page 32 of 77 | www.onsemi.com Bit 5 (FSPDIS), the functionality of this bit can be changed (see the Disabling Fan Start-Up Timeout section). PWM1 Configuration Register (0x5C) <2:0> SPIN, start-up timeout for PWM1 000 = no start-up timeout 001 = 100 ms 010 = 250 ms default 011 = 400 ms 100 = 667 ms 101 = 1 sec 110 = 2 sec 111 = 4 sec PWM2 Configuration Register (0x5D) <2:0> SPIN, start-up timeout for PWM2 000 = no start-up timeout 001 = 100 ms 010 = 250 ms default 011 = 400 ms 100 = 667 ms 101 = 1 sec 110 = 2 sec 111 = 4 sec PWM3 Configuration Register (0x5E) <2:0> SPIN, start-up timeout for PWM3 000 = no start-up timeout 001 = 100 ms 010 = 250 ms default 011 = 400 ms 100 = 667 ms 101 = 1 sec 110 = 2 sec 111 = 4 sec Disabling Fan Start-Up Timeout Although a fan startup makes fan spin-ups more quiet than fixed-time spin-ups, users can use fixed spin-up times. Setting Bit 5 (FSPDIS) to 1 in Configuration Register 1 (0x40) disables the spin-up for two TACH pulses, and the fan spins up for the fixed time selected in Register 0x5C to Register 0x5E. PWM LOGIC STATE The PWM outputs can be programmed high for 100% duty cycle (noninverted) or programmed low for 100% duty cycle (inverted). PWM1 Configuration Register (0x5C) <4> INV 0 = logic high for 100% PWM duty cycle 1 = logic low for 100% PWM duty cycle PWM2 Configuration Register (0x5D) <4> INV 0 = logic high for 100% PWM duty cycle 1 = logic low for 100% PWM duty cycle PWM3 Configuration Register (0x5E) <4> INV 0 = logic high for 100% PWM duty cycle 1 = logic low for 100% PWM duty cycle Low Frequency Mode PWM Drive Frequency The PWM drive frequency can be adjusted for the application. Register 0x5F to Register 0x61 configure the PWM frequency for PWM1 to PWM3, respectively. In high frequency mode, the PWM drive frequency is 22.5 kHz and cannot be changed. PWM1 Frequency Registers (0x5F to 0x61) <2:0> FREQ 000 = 11.0 Hz 001 = 14.7 Hz 010 = 22.1 Hz 011 = 29.4 Hz 100 = 35.3 Hz default 101 = 44.1 Hz 110 = 58.8 Hz 111 = 88.2 Hz |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |