XRT79L71IB datasheet(31/441 Pages) EXAR

31 / 441 page

áç

PRELIMINARY

XRT79L71

1 - CHANNEL DS3/E3 ATM UNI/PPP COMBO IC

REV. P1.0.3

TxUPrty/

TxPPrty

Transmit UTOPIA Data Bus - Parity Input/Transmit POS-PHY Interface - Par-

ity Input:

The function of this input pin depends upon whether the XRT79L71 has been

configured to operate in the ATM UNI or PPP Mode.

ATM UNI Mode - TxUPrty:

The ATM Layer processor will apply the parity value of the byte or word which is

being applied to the Transmit UTOPIA Data Bus (e.g., TxUData[7:0] or TxU-

Data[15:0]) inputs of the XRT79L71, respectively.

NOTE: This parity value should be computed based upon the odd-parity of the

data applied at the Transmit UTOPIA Data Bus.

The Transmit UTOPIA Interface block within the XRT79L71 will independently

compute an odd-parity value of each byte (or word) that it receives from the ATM

Layer processor and will compare it with the logic level of this input pin.

PPP Mode - TxPPrty:

The Link Layer Processor will apply the parity value of the byte or word which is

being applied to the Transmit POS-PHY Data Bus (e.g., TxPData[7:0] or TxP-

Data[15:0]) inputs of the XRT79L71, respectively.

NOTE: This parity value should be computed based upon the odd-parity of the

data applied to the Transmit POS-PHY Data Bus. The Transmit POS-

PHY Interface block within the XRT79L71 will independently compute an

odd-parity value of each byte (or word) that it receives from the Link

Layer processor and will compare it will the logic level of this input pin.

TxUEN/

TxPEN

Transmit UTOPIA Interface Block - Write Enable/Transmit POS-PHY Interface -

Write Enable:

The function of this input pin depends upon whether the XRT79L71 has been

configured to operate in the ATM UNI or PPP Mode.

ATM UNI Mode Operation - TxUEN:

This active-low signal, from the ATM Layer processor enables the data on the

Transmit UTOPIA Data Bus to be written into the TxFIFO on the rising edge of

TxUClk. When this signal is asserted, then the contents of the byte or word that

is present, on the Transmit UTOPIA Data Bus, will be latched into the Transmit

UTOPIA Interface block, on the rising edge of TxUClk.

When this signal is negated, then the Transmit UTOPIA Data bus inputs will be

tri-stated.

PPP Mode Operation - TxPEN:

This active-low signal, from the Link Layer processor enables the data on the

Transmit POS-PHY Data Bus to be written into the TxFIFO on the rising edge of

TxPClk. When this signal is asserted, then the contents of the byte or word that

is present, on the Transmit POS-PHY Data Bus, will be latched into the Transmit

POS-PHY Interface block, on the rising edge of TxPClk.

When this signal is negated, then the Transmit POS-PHY Data bus inputs will be

tri-stated.

PIN #NAME

TYPE

DESCRIPTION

XRT79L71IB Datasheet(PDF) 31 Page - Exar Corporation

XRT79L71IB Datasheet(HTML) 31 Page - Exar Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL