| Electronic Components Datasheet Search |
|
VR4102 Datasheet(PDF) 69 Page - NEC |
|
|
|||||||||||||||||||||||||||||
VR4102 Datasheet(HTML) 69 Page - NEC |
|
69 / 701 page ![]() CHAPTER 2 PIN FUNCTIONS 69 2.2.8 Keyboard Interface Signals These signals are used to control a keyboard circuit to the VR4102. Table 2-8 describes the functions of these signals. Table 2-8. Keyboard Interface Signals Signal I/O Description of function KPORT[7..0] I This is a keyboard scan data input signal. It is used to scan for pressed keys on the keyboard. KSCAN[11..0]/ GPIO[43..32] O These signal are used as keyboard scan data output signals and a general-purpose output port. The scan line is set as active when scanning for pressed keys on the keyboard. Pins that are not used for the key scan operation can be used as a general-purpose output port. 2.2.9 Audio Interface Signals This signal is used to input/output audio signals. Table 2-9 describes the functions of this signal. Table 2-9. Audio Interface Signals Signal I/O Description of function AUDIOOUT O This is an audio output signal. Analog signals that have been converted via the on-chip 10-bit D/A converter are output. AUDIOIN I This pin is the audio input pin. 2.2.10 Touch Panel/General Purpose A/D Interface Signals These are the signals to the on-chip A/D converter of the VR4102. Four of these signals are used for a touch panel, one is used for audio input, and the remaining three are used as general-purpose pins. Table 2-10 describes the functions of these signals. Table 2-10. Touch Panel/General Purpose A/D Interface Signals Signal I/O Description of function TPX[1..0] I/O This is an I/O signal that is used for the touch panel. It uses the voltage applied to the X coordinate and the voltage input to the Y coordinate to detect which coordinates on the touch panel are being pressed. TPY[1..0] I/O This is an I/O signal that is used for the touch panel. It uses the voltage applied to the Y coordinate and the voltage input to the X coordinate to detect which coordinates on the touch panel are being pressed. ADIN[2..0] I This is a general-purpose A/D input signal. |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |