| Electronic Components Datasheet Search |
|
SC3200 Datasheet(PDF) 369 Page - Advanced Micro Devices |
|
|
|||||||||||||||||||||||||||||
SC3200 Datasheet(HTML) 369 Page - Advanced Micro Devices |
|
369 / 447 page ![]() AMD Geode™ SC3200 Processor Data Book 369 9 Electrical Specifications Revision 5.1 9.0Electrical Specifications This chapter provides information about: • General electrical specifications • DC characteristics • AC characteristics All voltage values in this chapter are with respect to VSS unless otherwise noted. 9.1 General Specifications 9.1.1 Electro Static Discharge (ESD) This device is a high performance integrated circuit and is ESD sensitive. Handling and assembly of this device should be performed at ESD free workstations. Table 9-1 lists the ESD ratings of the SC3200. 9.1.2 Power/Ground Connections and Decoupling When testing and operating the SC3200, use standard high frequency techniques to reduce parasitic effects. For example: • Filter the DC power leads with low-inductance decou- pling capacitors. • Use low-impedance wiring. • Utilizing the PWR and GND pins. 9.1.3 Absolute Maximum Ratings Stresses beyond those indicated in the following table may cause permanent damage to the SC3200, reduce device reliability and result in premature failure, even when there is no immediately apparent sign of failure. Prolonged expo- sure to conditions at or near the absolute maximum ratings may also result in reduced device life span and reduced reliability. Note: The values in the following table are stress ratings only. They do not imply that operation under other conditions is impossible. Table 9-1. Electro Static Discharge (ESD) Parameter Units Human Body Model (HBM) 2000V ESD Machine Model (MM) 200V ESD Table 9-2. Absolute Maximum Ratings Symbol Parameter Min Max Unit Comments TCASE Operating case temperature -10 110 oC Note 1 TSTORAGE Storage temperature -45 125 oC Note 2 VCC Supply voltage See Table 9-3 V VMAX Voltage on 5V tolerant balls -0.5 6.0 V Note 3 Others -0.5 3.6 V Note 3, Note 4 IIK Input clamp current -0.5 10 mA Note 1 IOK Output clamp current 25 mA Note 1 Note 1. Power applied - no clocks. Note 2. No bias. Note 3. Voltage min is -0.8V with a transient voltage of 20 ns or less. Note 4. Voltage max is 4.0V with a transient voltage of 20 ns or less. |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |