ADU2 datasheet(16/162 Pages) ETC

16 / 162 page

Page 4

ADU2 Operation and Reference Manual

One green flash is associated with each satellite being tracked. Brackets are attached

to the bottom of the case for easy mounting.

Table 1.1 describes the components of the ADU2 Front Panel.

Figure 1.2: ADU2 Front Panel

Table 1.1: ADU2 Front Panel Components

Component

Description

Reset button

This button reboots the ADU2 unit. If the user defined parameters

are not saved, then reset sets the parameters to the factory defaults.

Port A

A complete RS-232 port with full-handshaking. Port A can be used

for communications with a hand-held computer, a personal

computer, or a radio. Port A is used for transferring data from the

receiver to a computer, from a PC to a receiver, and all other

communications to and from the receiver.

Port B

A complete RS-232 port with full-handshaking. Port B can be used

for communications with a hand-held computer, a personal

computer, or a radio. Port B is used for transferring data from the

receiver to a computer, from a PC to a receiver, and all other

communications to and from the receiver.

Port C

An abbreviated RS-232 port that has flow-control only. Port C is

currently inactive and reserved for future use.

Port D

An abbreviated RS-232 port that has flow-control only. Port D is

currently inactive and reserved for future use.

22 cm

10 cm

ADU2 Datasheet(PDF) 16 Page - List of Unclassifed Manufacturers