
20 of 70
RF6001
Rev A3 DS050929
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com.
Part of the POLARIS™ TOTAL RADIO™ Solution
RXMODE=000, DBL=1
In this mode the SSI provides two samples of I and two samples of Q for each GSM symbol period. The output data pattern on
DRI is 12 bits of I data followed by 12 bits of Q data. In this case, FSR is (13/24)MHz=541.667kbps and always marks the
beginning of the I data transfer. CLKR is 13MHz.
The various CLKR modes are defined as follows: with CLKRM=00 and RXCKB=0, CLKR will shut down after the Q data transfer
completes until the next I data transfer to save power (with RXMODE=000 and DBL=1, CLKR will always be enabled as there
is no blank data); with CLKRM=01 and RXCKB=0, CLKR is always enabled if ENR is true; with CLKRM=1x, CLKR is always dis-
abled.
The following diagram summarizes this mode of operation.
RXMODE=001, DBL=0
In this mode the SSI provides one sample of I and one sample of Q for each GSM symbol period. The output data pattern on
DRI is 16 bits of I data followed by 32 blank bits, and the output data pattern on DRQ is 16 bits of Q data followed by 32 blank
bits. In this case FSR is (13/48)MHz=270.8333kbps and CLKR is 13MHz.
The various CLKR modes are defined as follows: with CLKRM=00 and RXCKB=0, CLKR will shut down after the Q data transfer
completes until the next I data transfer to save power; with CLKRM=01 and RXCKB=0, CLKR is always enabled if ENR is true;
with CLKRM=1x, CLKR is always disabled.
The following diagram summarizes this mode of operation.
1
2
3
11
12
13
14
ENR
15
23
24
25
26
48
12
Tcs
Tcwh
Tcwl
Th
CLKR,
CLKRM=00
CLKR,
CLKRM=01
FSR
Tsu
DRQ
DRI
I(11)
I(10)
I(1)
I(0)
Q(11)
Q(10)
Q(1)
Q(0)
I(11)
I(10)
1
2
3
1112
13141523
24
1
2
ENR
CLKR,
CLKRM=00 or 01
FSR
DRI
I(11)
I(10)
I(1)
I(0)
Q(11)
Q(10)
Q(1)
Q(0)
I(11)
I(10)
DRQ