
21 of 70
RF6001
Rev A3 DS050929
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com.
Part of the POLARIS™ TOTAL RADIO™ Solution
RXMODE=001, DBL=1
In this mode the SSI provides two samples of I and two samples of Q for each GSM symbol period. The output data pattern on
DRI is 16 bits of I data followed by 8 blank bits, and the output data pattern on DRQ is 16 bits of Q data followed by 8 blank
bits. In this case, FSR is (13/24)MHz=541.667kbps and always marks the beginning of the I and Q data transfer. CLKR is
13MHz.
The various CLKR modes are defined as follows: with CLKRM=00 and RXCKB=0, CLKR will shut down after the Q data transfer
completes until the next I data transfer to save power; with CLKRM=01 and RXCKB=0, CLKR is always enabled if ENR is true;
with CLKRM=1x, CLKR is always disabled.
The following diagram summarizes this mode of operation.
RXMODE=010
In this mode the SSI provides one sample of I and one sample of Q for each GSM symbol period. The output data pattern on
DRI is 16 bits of I data followed by 16 bits of Q data. In this case, FSR is (8.667/32)MHz=270.833kbps and always marks the
beginning of the I data transfer. CLKR is 8.667MHz.
The various CLKR modes are defined as follows: with CLKRM=00 and RXCKB=0, CLKR will shut down after the Q data transfer
completes until the next I data transfer to save power (with RXMODE=010, CLKR will always be enabled as there is no blank
data); with CLKRM=01 and RXCKB=0, CLKR is always enabled if ENR is true; with CLKRM=1x, CLKR is always disabled.
DBL has no effect in this mode.
The following diagram summarizes this mode of operation.
DRI
I(15)
I(14)
I(1)
I(0)
I(15)
I(14)
CLKR,
CLKRM=00
ENR
1
2
3
15
16
17
18
19
47
48
1
2
CLKR,
CLKRM=01
FSR
DRQ
Q(15)
Q(14)
Q(1)
Q(0)
Q(15)
Q(14)
ENR
12
3
15
16
17
18
19
23
24
1
2
CLKR,
CLKRM=00
CLKR,
CLKRM=01
FSR
DRI
I(15)
I(14)
I(1)
I(0)
I(15)
I(14)
DRQ
Q(15)
Q(14)
Q(1)
Q(0)
Q(15)
Q(14)