CS5530A datasheet(96/259 Pages) AMD

96 / 259 page

AMD Geode™ CS5530A Companion Device Data Book

PC/AT Compatibility Logic

Revision 1.1

4.5.3

ROM Interface

The CS5530A positively decodes memory addresses

000F0000h-000FFFFFh

(64

KB)

and

FFFC0000h-

FFFFFFFFh (256 KB) at reset. These memory cycles

cause the CS5530A to claim the cycle, and generate an

ISA bus memory cycle with KBROMCS# asserted. The

CS5530A can also be configured to respond to memory

addresses

FF000000h-FFFFFFFFh

(16

MB)

and

000E0000h-000FFFFFh (128 KB).

Flash ROM is supported in the CS5530A by enabling the

KBROMCS# signal on write accesses to the ROM region.

Normally only read cycles are passed to the ISA bus, and

the KBROMCS# signal is suppressed. When the ROM

Write Enable bit (F0 Index 52h[1]) is set, a write access to

the ROM address region causes an 8-bit write cycle to

occur with MEMW# and KBROMCS# asserted. Table 4-39

shows the ROM interface related programming bits.

4.5.4

Megacells

The CS5530A core logic integrates:

• Two 8237-equivalent DMA controllers (DMAC) with full

32-bit addressing for DMA transfers.

• Two 8259-equivalent interrupt controllers providing 13

individually programmable external interrupts.

• An 8254-equivalent timer for refresh, timer, and speaker

logic.

• NMI control and generation for PCI system errors and all

parity errors.

• Support for standard AT keyboard controllers, reset

control, and VSA technology audio.

Table 4-39. ROM Interface Related Bits

Bit

Description

F0 Index 52h

ROM/AT Logic Control Register (R/W)

Reset Value = F8h

Upper ROM Address Range: KBROMCS# is asserted for ISA memory read accesses.

0 = FFFC0000h-FFFFFFFFh (256 KB, Default); 1 = FF000000h-FFFFFFFFh (16 MB)

Note: PCI Positive decoding for the ROM space is enabled at F0 Index 5Bh[5]).

ROM Write Enable: Assert KBROMCS# during writes to configured ROM space (configured in bits 2 and 0),

allowing Flash programming. 0 = Disable; 1 = Enable.

Lower ROM Address Range: KBROMCS# is asserted for ISA memory read accesses.

0 = 000F0000h-000FFFFFh (64 KB, Default); 1 = 000E0000h-000FFFFFh (128 KB).

Note: PCI Positive decoding for the ROM space is enabled at F0 Index 5Bh[5]).

F0 Index 5Bh

Decode Control Register 2 (R/W)

Reset Value = 20h

BIOS ROM Positive Decode: Selects PCI positive or subtractive decoding for accesses to the configured ROM space.

0 = Subtractive; 1 = Positive.

ROM configuration is at F0 Index 52h[2:0].

CS5530A Datasheet(PDF) 96 Page - Advanced Micro Devices

CS5530A Datasheet(HTML) 96 Page - Advanced Micro Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL