| Electronic Components Datasheet Search |
|
AD9554BCPZ Datasheet(PDF) 86 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
AD9554BCPZ Datasheet(HTML) 86 Page - Analog Devices |
|
86 / 116 page ![]() AD9554 Data Sheet Rev. D | Page 86 of 116 Table 87. DPLL_0 REFC Integer Part of Feedback (N0) Divider Address Bits Bit Name Description 0x045E [7:0] Digital PLL_0 feedback divider—Integer Part N0 Digital PLL_0 integer feedback divider (minus 1), Bits[7:0]. Default: 0x00. 0x045F [7:0] Digital PLL_0 integer feedback divider, Bits[15:8]. Default: 0x00. 0x0460 [7:2] Reserved Default: 0x00. [1:0] Digital PLL_0 feedback divider—Integer Part N0 Digital PLL_0 integer feedback divider, Bits[17:16]. Default: 00b. The default for Register 0x045E to Register 0x460: 0x000000. Table 88. DPLL_0 REFC Fractional Part of Fractional Feedback Divider—FRAC0 Address Bits Bit Name Description 0x0461 [7:0] Digital PLL_0 fractional feedback divider—FRAC0 The numerator of the fractional-N feedback divider, Bits[7:0]. Default: 0x00. 0x0462 [7:0] The numerator of the fractional-N feedback divider, Bits[15:8]. Default: 0x00. 0x0463 [7:0] The numerator of the fractional-N feedback divider, Bits[23:16]. Default: 0x00. Table 89. DPLL_0 REFC Modulus of Fractional Feedback Divider—MOD0 Address Bits Bit Name Description 0x0464 [7:0] Digital PLL_0 feedback divider modulus—MOD0 The denominator of the fractional-N feedback divider, Bits[7:0]. Default: 0x00. 0x0465 [7:0] The denominator of the fractional-N feedback divider, Bits[15:8]. Default: 0x00. 0x0466 [7:0] The denominator of the fractional-N feedback divider, Bits[23:16]. Default: 0x00. DPLL_0 SETTINGS FOR REFERENCE INPUT D (REFD) (REGISTER 0x0467 TO REGISTER 0x0473) Table 90. DPLL_0 REFD Priority Setting Address Bits Bit Name Description 0x0467 [7:3] Reserved Default: 00000b. [2:1] REFD priority These bits set the priority level (0 to 3) of REFD relative to the other input references. 00 (default) = 0 (highest). 01 = 1. 10 = 2. 11 = 3. 0 Enable REFD This bit enables DPLL_0 to lock to REFD. 0 (default) = REFD is not enabled for use by DPLL_0. 1 = REFD is enabled for use by DPLL_0. Table 91. DPLL_0 REFD Loop Bandwidth Scaling Factor Address Bits Bit Name Description 0x0468 [7:0] Digital PLL_0 loop bandwidth scaling factor (unit of 0.1 Hz) Digital PLL_0 loop bandwidth scaling factor, Bits[7:0]. Default: 0x00. 0x0469 [7:0] Digital PLL_0 loop bandwidth scaling factor, Bits[15:8]. Default: 0x00. The loop bandwidth must always be less than the DPLL phase detector frequency divided by 20. The DPLL may not lock reliably if the DPLL loop bandwidth is <50 Hz and a crystal is used for the system clock. See the Choosing the SYSCLK Source section for details. 0x046A [7:2] Reserved Default: 0x00. 1 Base loop filter selection 0 = base loop filter with normal (70°) phase margin (default). 1 = base loop filter with high phase margin. For loop bandwidths ≤2 kHz, there is ≤0.1 dB peaking in the closed-loop transfer function. Setting this bit is also recommended for loop bandwidths >2 kHz. 0 Digital PLL_0 loop BW scaling factor (unit of 0.1 Hz) Digital PLL loop bandwidth scaling factor, Bit 16. Default: 0b. |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |