SH7101 datasheet(270/560 Pages) RENESAS

270 / 560 page

Section 8 Multifunction Timer Pulse Unit (MTU)

Rev.1.00 Sep. 18, 2008 Page 236 of 522

REJ09B0069-0100

(1) Operation when Error Occurs during Normal Mode Operation, and Operation is

Restarted in Normal Mode

Figure 8.84 shows an explanatory diagram of the case where an error occurs in normal mode and

operation is restarted in normal mode after re-setting.

RESET

TMDR

(normal)

TOER

(1)

PFC

(MTU)

TIOR

(1 init

0 out)

TSTR

(1)

Match

Error

occurs

PFC

(PORT)

TSTR

(0)

TMDR

(normal)

TIOR

(1 init

0 out)

PFC

(MTU)

TSTR

(1)

MTU module

output

TIOC*A

TIOC*B

Port output

PEn

n=0 to 15

Hi-Z

Figure 8.84 Error Occurrence in Normal Mode, Recovery in Normal Mode

After a reset, MTU output is low and ports are in the high-impedance state.

After a reset, the TMDR setting is for normal mode.

For channels 3 and 4, enable output with TOER before initializing the pins with TIOR.

Initialize the pins with TIOR. (The example shows initial high output, with low output on

compare-match occurrence.)

Set MTU output with the PFC.

The count operation is started by TSTR.

Output goes low on compare-match occurrence.

An error occurs.

Set port output with the PFC and output the inverse of the active level.

10. The count operation is stopped by TSTR.

11. Not necessary when restarting in normal mode.

12. Initialize the pins with TIOR.

13. Set MTU output with the PFC.

14. Operation is restarted by TSTR.

SH7101 Datasheet(PDF) 270 Page - Renesas Technology Corp

SH7101 Datasheet(HTML) 270 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL