| Electronic Components Datasheet Search |
|
32186 Datasheet(PDF) 183 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
32186 Datasheet(HTML) 183 Page - Renesas Technology Corp |
|
183 / 1032 page ![]() 6 INTERNAL MEMORY 6-41 32185/32186 Group Hardware Manual Rev.1.10 REJ09B0235-0110 May 15, 07 b0 123 456 78 9 10 11 12 13 14 b15 FLBST ? ??? ??? ?? ??? ?? ?? 6.6 Programming Internal Flash Memory START Write the Read Lock Bit Status command (H'7171) to any address of the internal flash memory Read the last even address of the flash memory block to be checked END Figure 6.6.13 Read Lock Bit Status (Memory Area Read Mode) 2) Register read mode (FLOCKS bit = 1) Write the command data (H’7171) to any address of the target block. Next, write the verify command data (H'D0D0), and the Flash Control Register 4 (FCNT4) FLOCKST (Lock Bit Status) bit shows whether the target block is protected. (6) Read Lock Bit Status command The Read Lock Bit Status command is provided for checking whether a flash memory block is protected against programming/erase operation. The method for reading lock bit can be chosen from the following depends on the setting for Flash Control Register 2 (FCNT2) FLOCKS (Lock bit read mode select) bit. 1) Memory area read mode (FLOCKS bit = 0) Write the command data (H’7171) to any address of the internal flash memory. Next, read the last even address of the flash memory block to be checked (see Table 6.6.3, “Target Blocks and Specified Ad- dresses”), and the read data shows whether the target block is protected. If the FLBST (lock bit) in the read data is "0," it means that the target memory block is protected. If the FLBST (lock bit) is "1," it means that the target memory block is not protected. Lock Bit Status Register (FLBST) <Upon exiting reset: Undefined> b Bit Name Function R W 0–8 No function assigned. ?0 9 FLBST 0: Protected R – Lock bit 1: Not protected 10–15 No function assigned. ? 0 The Lock Bit Status Register is a read-only register, which is included for each memory block independently of one another. To read this register, Flash Control Register 2 (FCNT2) FLOCKS bit must be set to "0." |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |