SH7101 datasheet(149/560 Pages) RENESAS

149 / 560 page

Section 8 Multifunction Timer Pulse Unit (MTU)

TIMMTU0A_010020030200

Rev.1.00 Sep. 18, 2008 Page 115 of 522

REJ09B0069-0100

Section 8 Multifunction Timer Pulse Unit (MTU)

This LSI has an on-chip multifunction timer pulse unit (MTU) that comprises five 16-bit timer

channels.

The block diagram is shown in figure 8.1.

8.1

Features

• Maximum 16-pulse input/output

• Selection of 8 counter input clocks for each channel

• The following operations can be set for each channel:

⎯ Waveform output at compare match

⎯ Input capture function

⎯ Counter clear operation

Multiple timer counters (TCNT) can be written to simultaneously

Simultaneous clearing by compare match and input capture is possible

⎯ A maximum 12-phase PWM output is possible in combination with synchronous operation

• Buffer operation settable for channels 0, 3, and 4

• Phase counting mode settable independently for each of channels 1 and 2

• Cascade connection operation

• Fast access via internal 16-bit bus

• 23 interrupt sources

• Automatic transfer of register data

• A/D converter conversion start trigger can be generated

• Module standby mode can be set

• Positive and negative 3-phase waveforms (6-phase waveforms in total) can be output in

complementary or reset synchronous PWM mode by combining channels 3 and 4.

• AC synchronous motor (brushless DC motor) can be driven in complementary or reset

synchronous PWM mode by combining channels 0, 3, and 4. Chopping or level output can be

selected as drive waveform output.

SH7101 Datasheet(PDF) 149 Page - Renesas Technology Corp