ATtiny48 datasheet(50/266 Pages) ATMEL

50 / 266 page

8008C–AVR–03/09

ATtiny48/88

9.3

9.3.1

EICRA – External Interrupt Control Register A

The External Interrupt Control Register A contains control bits for interrupt sense control.

• Bits 7..4 – Res: Reserved Bits

These bits are reserved and will always read zero.

• Bits 3, 2 – ISC11, ISC10: Interrupt Sense Control 1 Bit 1 and Bit 0

The External Interrupt 1 is activated by the external pin INT1 if the SREG I-flag and the corre-

sponding interrupt mask are set. The level and edges on the external INT1 pin that activate the

interrupt are defined in Table 9-2. The value on the INT1 pin is sampled before detecting edges.

If edge or toggle interrupt is selected, pulses that last longer than one clock period will generate

an interrupt. Shorter pulses are not guaranteed to generate an interrupt. If low level interrupt is

selected, the low level must be held until the completion of the currently executing instruction to

generate an interrupt.

• Bits 1, 0 – ISC01, ISC00: Interrupt Sense Control 0 Bit 1 and Bit 0

The External Interrupt 0 is activated by the external pin INT0 if the SREG I-flag and the corre-

sponding interrupt mask are set. The level and edges on the external INT0 pin that activate the

interrupt are defined in Table 9-3. The value on the INT0 pin is sampled before detecting edges.

If edge or toggle interrupt is selected, pulses that last longer than one clock period will generate

an interrupt. Shorter pulses are not guaranteed to generate an interrupt. If low level interrupt is

selected, the low level must be held until the completion of the currently executing instruction to

generate an interrupt.

Bit

654

–

ISC11

ISC10

ISC01

ISC00

EICRA

Read/Write

R/W

Initial Value

Table 9-2.

Interrupt 1 Sense Control

ISC11

ISC10

Description

The low level of INT1 generates an interrupt request.

Any logical change on INT1 generates an interrupt request.

The falling edge of INT1 generates an interrupt request.

The rising edge of INT1 generates an interrupt request.

Table 9-3.

Interrupt 0 Sense Control

ISC01

ISC00

Description

The low level of INT0 generates an interrupt request.

Any logical change on INT0 generates an interrupt request.

The falling edge of INT0 generates an interrupt request.

The rising edge of INT0 generates an interrupt request.

ATtiny48 Datasheet(PDF) 50 Page - ATMEL Corporation

ATtiny48 Datasheet(HTML) 50 Page - ATMEL Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL