102 / 144 page
NetBootLoader
CP321
Page 5 - 22
© 2003 Kontron Modular Computers GmbH
ID 24977, Rev. 02
LS
FUNCTION:
Display listing of the current ftp server directory
SYNTAX:
ls
DESCRIPTION:
To display a listing of the current ftp server directory the command
“ls” is used. This command downloads the listing to the data buffer
and then the listing is displayed. Any previously loaded image in the
data buffer is overwritten. If an attempt is then made to program the
FLASH after the “ls” command has been issued it will fail.
MD
FUNCTION:
Display visible memory
SYNTAX:
md [<adr>]
where:
md
command
<adr>
parameter: value: hexadecimal
starting address of a visible memory area
DESCRIPTION:
To display a visible memory area the command “md” is used. The
first time the command “md” is issued, visible memory contents
starting at the address 0x0 are displayed if no “<adr>” parameter is
used. If issued again without the “<adr>” parameter, the display starts
with the end address of the previous display. Data is displayed as
hexadecimal 32-bit words and as ASCII dump.
English ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
