 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
CLRC663 Datasheet(PDF) 72 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
CLRC663 Datasheet(HTML) 72 Page - NXP Semiconductors |
|
|
72 / 177 page  NXP Semiconductors CLRC663 High performance multi-protocol NFC frontend CLRC663 and CLRC663 plus Bit Symbol Description 3Fh indicates a bit collision in the 64th bit (8th bit of the 8th byte) These bits shall only be interpreted in Passive communication mode at 106 kbit/s or ISO/IEC 14443 type A and read /write mode for MIFARE Classic or ISO/IEC 15693/ICODE SLI read/ write mode if bit CollPosValid is set. Note: If RxBitCtrl.RxAlign is set to a value different to 0, this value is included in the CollPos. Example: RxAlign = 4h, a collision occurs in the 4th received bit (which is the last bit of that UID byte). The CollPos = 7h in this case. Table 78. RxColl bits...continued 9.7 Timer configuration registers 9.7.1 TControl Control register of the timer section. The TControl implements a special functionality to avoid the not intended modification of bits. Bit 3..0 indicates, which bits in the positions 7..4 are intended to be modified. Example: writing FFh sets all bits 7..4, writing F0h does not change any of the bits 7..4 Bit 7 6 5 4 3 2 1 0 Symbol T3Running T2Running T1Running T0Running T3Start StopNow T2Start StopNow T1Start StopNow T0Start StopNow Access rights dy dy dy dy w w w w Table 79. TControl register (address 0Eh) Bit Symbol Description 7 T3Running Indicates Timer3 is running.If the bit T3startStopNow is set/reset, this bit and the timer can be started/stopped 6 T2Running Indicates Timer2 is running. If the bit T2startStopNow is set/reset, this bit and the timer can be started/stopped 5 T1Running Indicates tTmer1 is running. If the bit T1startStopNow is set/reset, this bit and the timer can be started/stopped 4 T0Running Indicates Timer0 is running. If the bit T0startStopNow is set/reset, this bit and the timer can be started/stopped 3 T3StartStop Now The bit 7 of TControl T3Running can be modified if set 2 T2StartStop Now The bit 6of TControl T2Running can be modified if set 1 T1StartStop Now The bit 5of TControl T1Running can be modified if set 0 T0StartStop Now The bit 4 of TControl T0Running can be modified if set Table 80. TControl bits CLRC663 All information provided in this document is subject to legal disclaimers. © 2024 NXP B.V. All rights reserved. Product data sheet Rev. 5.3 — 3 January 2024 72 / 177 |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
