TMS320C6711 datasheet(36/129 Pages) TI

36 / 129 page

TMS320C6711, TMS320C6711B, TMS320C6711C, TMS320C6711D

FLOATING-POINT DIGITAL SIGNAL PROCESSORS

SPRS088L − FEBRUARY 1999 − REVISED MAY 2004

POST OFFICE BOX 1443

• HOUSTON, TEXAS 77251−1443

device and development-support tool nomenclature

To designate the stages in the product development cycle, TI assigns prefixes to the part numbers of all

TMS320 DSP devices and support tools. Each TMS320 DSP commercial family member has one of three

prefixes: TMX, TMP, or TMS. Texas Instruments recommends two of three possible prefix designators for

support tools: TMDX and TMDS. These prefixes represent evolutionary stages of product development from

engineering prototypes (TMX/TMDX) through fully qualified production devices/tools (TMS/TMDS).

Device development evolutionary flow:

TMX

Experimental device that is not necessarily representative of the final device’s electrical

specifications

TMP

Final silicon die that conforms to the device’s electrical specifications but has not completed

quality and reliability verification

TMS

Fully qualified production device

Support tool development evolutionary flow:

TMDX

Development-support product that has not yet completed Texas Instruments internal qualification

testing.

TMDS

Fully qualified development-support product

TMX and TMP devices and TMDX development-support tools are shipped with appropriate disclaimers

describing their limitations and intended uses. Experimental devices (TMX) may not be representative of a final

product and Texas Instruments reserves the right to change or discontinue these products without notice.

TMS devices and TMDS development-support tools have been characterized fully, and the quality and reliability

of the device have been demonstrated fully. TI’s standard warranty applies.

Predictions show that prototype devices (TMX or TMP) have a greater failure rate than the standard production

devices. Texas Instruments recommends that these devices not be used in any production system because their

expected end-use failure rate still is undefined. Only qualified production devices are to be used.

TI device nomenclature also includes a suffix with the device family name. This suffix indicates the package type

(for example, GDP), the temperature range (for example, blank is the default commercial temperature range

and A is the extended temperature range), and the device speed range in megahertz (for example, -167 is

167 MHz).

Table 18 identifies the C6711/11B/11C/11D device part numbers (orderables). For more details and for ordering

information, see the TI website (www.ti.com). Figure 5 provides a legend for reading the complete device name

for any TMS3206000 DSP family member.

TMS320 is a trademark of Texas Instruments.

TMS320C6711 Datasheet(PDF) 36 Page - Texas Instruments

TMS320C6711 Datasheet(HTML) 36 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL