iCE40 LP/HX Family

Data Sheet

© 2011-2018 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal.

All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.

FPGA-DS-02029-3.5

49

Revision 3.0, July 2014

Section

Change Summary

DC and Switching Characteristics

Revised and/or added Typ. VCC data in the following sections.



Static Supply Current – LP Devices



Static Supply Current – HX Devices



Programming NVCM Supply Current – LP Devices



Programming NVCM Supply Current – HX Devices

In each section table, the footnote indicating Advanced device status was removed.

Pinout Information

Updated Pin Information Summary section. Added footnote 1 to CM49 under iCE40LP1K.

Revision 02.9, April 2014

Section

Change Summary

Ordering Information

Changed “i” to “I” in part number description and ordering part numbers.

Added part numbers to the Ultra Low Power Industrial Grade Devices, Halogen Free (RoHS)

Packaging table.

Revision 02.8, February 2014

Section

Change Summary

DC and Switching Characteristics

Updated Features section.



Corrected standby power units.



Included High Current LED Drivers.

Updated Table 1-1, iCE40 LP/HX Family Selection Guide.



Removed LP384 Programmable I/O for 81 ucBGA package.

Architecture

Updated Supported Standards section. Added information on High Current LED drivers.

DC and Switching Characteristics

Corrected typos.

Added footnote to the Peak Startup Supply Current – LP Devices table.

Ordering Information

Updated part number description in the Ultra Low Power (LP) Devices section.

Added part numbers to the Ultra Low Power Industrial Grade Devices, Halogen Free (RoHS)

Packaging table.

Revision 02.7, October 2013

Section

Change Summary

Introduction

Updated Features list and iCE40 LP/HX Family Selection Guide table.

Architecture

Revised iCE40-1K device to iCE40LP/HX1K device.

DC and Switching Characteristics

Added iCE40LP640 device information.

Pinout Information

Added iCE40LP640 and iCE40LP1K information.

Ordering Information

Added iCE40LP640 and iCE40LP1K information.

Revision 02.6, September 2013

Section

Change Summary

DC and Switching Characteristics

Updated Absolute Maximum Ratings section.

Updated sysCLOCK PLL Timing – Preliminary table.

Pinout Information

Updated Pin Information Summary table.