| Electronic Components Datasheet Search |
|
HD6433644R Datasheet(PDF) 302 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
HD6433644R Datasheet(HTML) 302 Page - Renesas Technology Corp |
|
302 / 549 page ![]() Section 10 Serial Communication Interface Rev. 6.00 Sep 12, 2006 page 282 of 526 REJ09B0326-0600 Bit 6 Extended Data Bit (SOL): Bit 6 sets the SO1 output level. When read, SOL returns the output level at the SO1 pin. After completion of a transmission, SO1 continues to output the value of the last bit of transmitted data. The SO1 output can be changed by writing to SOL before or after a transmission. The SOL bit setting remains valid only until the start of the next transmission. SSB mode settings also become invalid. To control the level of the SO1 pin after transmission ends, it is necessary to write to the SOL bit at the end of each transmission. Do not write to this register while transmission is in progress, because that may cause a malfunction. Bit 6: SOL Description 0 Read: SO1 pin output level is low (initial value) Write: SO1 pin output level changes to low 1 Read: SO1 pin output level is high Write: SO1 pin output level changes to high Bit 5 Overrun Error Flag (ORER): When an external clock is used, bit 5 indicates the occurrence of an overrun error. If noise occurs during a transfer, causing an extraneous pulse to be superimposed on the normal serial clock, incorrect data may be transferred. If a clock pulse is input after transfer completion, this bit is set to 1 indicating an overrun. Bit 5: ORER Description 0 Clearing condition: After reading ORER = 1, cleared by writing 0 to ORER (initial value) 1 Setting condition: Set if a clock pulse is input after transfer is complete, when an external clock is used Bits 4 to 2 Reserved Bits: Bits 4 to 2 are reserved. They are always read as 0, and cannot be modified. Bit 1 TAIL MARK Transmit Flag (MTRF): When bit MRKON is set to 1, bit 1 indicates that TAIL MARK is being sent. Bit 1 is a read-only bit and cannot be modified. Bit 1: MTRF Description 0 Idle state, or 8- or 16-bit data is being transferred (initial value) 1 TAIL MARK is being sent |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |