| Electronic Components Datasheet Search |
|
VNF1248F Datasheet(PDF) 39 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
VNF1248F Datasheet(HTML) 39 Page - STMicroelectronics |
|
39 / 79 page ![]() Table 32. Control register fields (not NVM mapped) Register field Description Use CR#1→OUTCTL Output channel (external power switch) control CR#1→BYPASSCTL Internal bypass switch control CR#1→S_T_START Self-test start trigger Effective only in the unlocked/self-test states CR#1→S_T_STOP Self-test stop trigger CR#1→S_T_CFG Self-test type selection CR#1→EN Unlocked state transition control CR#1→GOSTBY Standby state transition control CR#1→CCM_CTRL_ON Capacitive charge mode start trigger CR#1→CCM_CTRL_OFF Capacitive charge mode stop trigger CR#1→locked_MODE_EN Locked mode enable CR#1→FS_CFG_UPLOAD NVM configuration upload to RAM registers CR#3→UNLOCK Unlock access for specific control register fields CR#1,2,3,4,5→WD_TRIG Watchdog monitor trigger If the NVM default configuration is not used (NVM_DEF_CFG_EN = ‘0’), the RAM configuration registers for NVM (Table 30. NVM mapped configuration parameters) is locked to prevent any unsafe changes to the device configuration while it is in a locked state. However, write access to the RAM control register fields in the device and output configuration options table is still allowed. 10.1.4 Default configuration upload to RAM It is possible to upload default configuration from internal registers into correspondent RAM configuration registers, through a specific programmable control bit (NVM_DEF_CFG_UPLOAD, CR#1), to allow read access by the SPI interface of parameters default settings; the current content of RAM configuration registers is overwritten with default values stored internally. This feature enables to: • Configure the device in an unlocked state with a well-known, defined set of parameters, without the need to do that by a sequence of SPI frames. • Monitor periodically the default configuration applied to the device while in fail-safe/locked states, to verify expected parameters settings have not been corrupted (safety purpose). VNF1248F Non-volatile memory (NVM) customer programming DS14109 - Rev 7 page 39/79 |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |