LAN9250 datasheet(59/421 Pages) MICROCHIP

59 / 421 page

 2015 Microchip Technology Inc.

DS00001913A-page 59

LAN9250

host_intf_mode_strap

Host Interface Mode Strap:

Configures the host manage-

ment mode.

0 = SPI Mode

1 = HBI Mode

The operating mode results from the following mapping:

See Table 7-3 for the combined host interface strapping.

Note:

Refer to Section 2.0, "General Description," on

page 8 for additional information on the various

modes of the device.

MNGT1 :

MNGT0

HBI_addr_mode_strap

HBI Address Mode Strap:

Configures the HBI interface for

multiplexed or non-multiplexed indexed addressing modes.

0 = multiplexed

1 = non-multiplexed indexed

See Table 7-3 for the combined host interface strapping.

Note:

Refer to Section 2.0, "General Description," on

page 8 for additional information on the various

modes of the device.

MNGT1

HBI_addr_phase_strap

HBI Address Phase Strap:

Configures the number of

address cycles for the HBI interface when in multiplexed

address mode.

0 = single phase multiplexed

1 = dual phase multiplexed

See Table 7-3 for the combined host interface strapping.

Note:

Refer to Section 2.0, "General Description," on

page 8 for additional information on the various

modes of the device.

MNGT3

TABLE 7-2:

HARD-STRAP CONFIGURATION STRAP DEFINITIONS (CONTINUED)

Strap Name

Description

Pins

MNGT1 : MNGT0

mngt_mode_strap

0 (SPI)

01, 10 or 11

1 (HBI)

LAN9250 Datasheet(PDF) 59 Page - Microchip Technology

LAN9250 Datasheet(HTML) 59 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL