| Electronic Components Datasheet Search |
|
ST2202 Datasheet(PDF) 41 Page - List of Unclassifed Manufacturers |
|
|
|||||||||||||||||||||||||||||
ST2202 Datasheet(HTML) 41 Page - List of Unclassifed Manufacturers |
|
41 / 65 page ![]() Sitronix ST2202 Ver 2.0a 41/65 2003-May-05 external DC-DC converter, which generates a high voltage for driving liquid crystal. POFF outputs “1” when clearing LPWR (LCTR), and outputs “0” by setting this bit, which is also the default value. BLANK (Contrast control) The LCD blank signal is used to control the contrast of display by setting contrast level in LPWM[5:0] with “00000” (default) represents a maximum level and “11111” is for minimum. The BLANK signal achieves this function by outputting a PWM signal according to the settings of contrast. Refer to section 16.4.10 for more information. Besides contrast control, BLANK signal plays another role of turning display off. This is controlled by register bit BLNK (LCTR). Setting BLNK bit will make BLANK signal to output “0” to blank the display regardless of contrast control. Setting BLNK bit will enable the PWM contrast control and of course the BLANK signal. If LPWMTR[5:0] are all zeros, BLANK signal will stay at high level with no PWM modulation. 16.2 Mapping the Display Data The screen width and height of the LCD panel are programmable through software. FIGURE 16-1 illustrates the relationship between the portion of a large graphics file displayed on the screen and the actual page. Although the maximum screen size can be up to 1024x512, the actual supported resolution is limited by the display buffer size, which is also the internal RAM size, 4K bytes. Each bit in the display memory corresponds to a pixel in the LCD panel. FIGURE 16-1 also shows the mapping of the display data to the LCD. FIGURE 16-1 LCD Screen Format 16.3 LCD Interface Timing The LCD controller continuously pumps the pixel data into the LCD panel via the LCD data bus. The bus is timed by the CP, LOAD, and FLM signals. Two kinds of data width, 1- and 4-bit, are supported for most monochrome LCD panels. Refer to FIGURE 16-2 for both 1- and 4-bit interface timing. |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |