| Electronic Components Datasheet Search |
|
LAN9250 Datasheet(PDF) 290 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
LAN9250 Datasheet(HTML) 290 Page - Microchip Technology |
|
290 / 421 page ![]() LAN9250 DS00001913A-page 290 2015 Microchip Technology Inc. 13.4 EEPROM Loader The EEPROM Loader interfaces to the I2C EEPROM controller, the PHYs and to the system CSRs (via the Register Access MUX). All system CSRs are accessible to the EEPROM Loader. The EEPROM Loader runs upon a pin reset (RST#), power-on reset (POR), digital reset (Digital Reset (DIGITAL_RST) bit in the Reset Control Register (RESET_CTL)) or upon the issuance of a RELOAD command via the EEPROM Com- mand Register (E2P_CMD). Refer to Section 6.2, "Resets," on page 38 for additional information on resets. The EEPROM contents must be loaded in a specific format for use with the EEPROM Loader. An overview of the EEPROM content format is shown in Table 13-3. Each section of EEPROM contents is discussed in detail in the follow- ing sections. 13.4.1 EEPROM LOADER OPERATION Upon a pin reset ((RST#), power-on reset (POR), digital reset (Digital Reset (DIGITAL_RST) bit in the Reset Control Register (RESET_CTL)) or upon the issuance of a RELOAD command via the EEPROM Command Register (E2P_CMD), the EEPROM Controller Busy (EPC_BUSY) bit in the EEPROM Command Register (E2P_CMD) will be set. While the EEPROM Loader is active, the Device Ready (READY) bit of the Hardware Configuration Register (HW_CFG) is cleared and no writes to the device should be attempted. The operational flow of the EEPROM Loader can be seen in Figure 13-8. TABLE 13-3: EEPROM CONTENTS FORMAT OVERVIEW EEPROM Address Description Value 0 EEPROM Valid Flag A5h 1 MAC Address Low Word [7:0] 1st Byte on the Network 2 MAC Address Low Word [15:8] 2nd Byte on the Network 3 MAC Address Low Word [23:16] 3rd Byte on the Network 4 MAC Address Low Word [31:24] 4th Byte on the Network 5 MAC Address High Word [7:0] 5th Byte on the Network 6 MAC Address High Word [15:8] 6th Byte on the Network 7 Configuration Strap Values Valid Flag A5h 8 - 16 Configuration Strap Values See Table 13-4 17 Burst Sequence Valid Flag A5h 18 Number of Bursts See Section 13.4.5, "Register Data" 19 and above Burst Data See Section 13.4.5, "Register Data" |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |