Electronic Components Datasheet Search
  English  ▼

X  

82G33 Datasheet(PDF) 74 Page - Intel Corporation

Part # 82G33
Description  Graphics and Memory Controller Hub
PDF  437 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
Manufacturer  INTEL [Intel Corporation]
Direct Link  http://www.intel.com
Logo INTEL - Intel Corporation

82G33 Datasheet(HTML) 74 Page - Intel Corporation

Back Button 82G33 Datasheet HTML 70Page - Intel Corporation 82G33 Datasheet HTML 71Page - Intel Corporation 82G33 Datasheet HTML 72Page - Intel Corporation 82G33 Datasheet HTML 73Page - Intel Corporation 82G33 Datasheet HTML 74Page - Intel Corporation 82G33 Datasheet HTML 75Page - Intel Corporation 82G33 Datasheet HTML 76Page - Intel Corporation 82G33 Datasheet HTML 77Page - Intel Corporation 82G33 Datasheet HTML 78Page - Intel Corporation Next Button
Zoom Inzoom in Zoom Outzoom out
 74 / 437 page
background image
(G)MCH Register Description
74
Datasheet
4.1
Register Terminology
The following table shows the register-related terminology that is used.
Item
Definition
RO
Read Only bit(s). Writes to these bits have no effect. This may be a status
bit or a static value.
RO/S
Read Only / Sticky bit(s). Writes to these bits have no effect. These are
status bits only. Bits are not returned to their default values by "warm"
reset, but will be reset with a cold/complete reset (for PCI Express related
bits a cold reset is “Power Good Reset” as defined in the PCI Express spec).
RS/WC
Read Set / Write Clear bit(s). The first time the bit is read with an enabled
byte, it returns the value 0, but a side-effect of the read is that the value
changes to 1. Any subsequent reads with enabled bytes return a 1 until a 1
is written to the bit. When the bit is read, but the byte is not enabled, the
state of the bit does not change, and the value returned is irrelevant, but will
match the state of the bit.
When a 0 is written to the bit, there is no effect. When a 1 is written to the
bit, its value becomes 0, until the next byte-enabled read. When the bit is
written, but the byte is not enabled, there is no effect.
RW
Read / Write bit(s). These bits can be read and written by software.
Hardware may only change the state of this bit by reset.
RWC
Read / Write Clear bit(s). These bits can be read. Internal events may set
this bit. A software write of ‘1’ clears (sets to ‘0’) the corresponding bit(s)
and a write of ‘0’ has no effect.
RWC/L
Read / Write Clear / Lockable bit(s). These bits can be read. Internal events
may set this bit. A software write of ‘1’ clears (sets to ‘0’) the corresponding
bit(s) and a write of ‘0’ has no effect. Additionally there is a Key bit (which is
marked R/W/K or R/W/L/K) that, when set, prohibits this bit field from being
writeable (bit field becomes Read Only).
RWC/S
Read / Write Clear / Sticky bit(s). These bits can be read. Internal events
may set this bit. A software write of ‘1’ clears (sets to ‘0’) the corresponding
bit(s) and a write of ‘0’ has no effect. Bits are not cleared by "warm" reset,
but will be reset with a cold/complete reset (for PCI Express related bits a
cold reset is “Power Good Reset” as defined in the PCI Express spec).
RW/B
Read / Write / Blind bit(s). These bits can be read and written by software.
Additionally there is a selector bit which, when set, changes what may be
read from these bits. The value written is always stored in a hidden register.
When the selector bit indicates that the written value should not be read,
some other status is read from this bit. When the selector bit indicates that
the written value should be read, the value in the hidden register is read
from this bit.
RW/B/L
Read / Write / Blind / Lockable bit(s). These bits can be read and written by
software. Additionally there is a selector bit which, when set, changes what
may be read from these bits. The value written is always stored in a hidden
register. When the selector bit indicates that the written value should not be
read, some other status is read from this bit. When the selector bit indicates
that the written value should be read, the value in the hidden register is read
from this bit. Additionally there is a Key bit (which is marked R/W/K or
R/W/L/K) that, when set, prohibits this bit field from being writeable (bit
field becomes Read Only).



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100  ...More


Datasheet Download

Go To PDF Page


Link URL



Does ALLDATASHEET help your business so far?  [ DONATE ] 

About Alldatasheet   |   Advertisement   |   Contact us   |   Privacy Policy   |   Link to Datasheet    |   Link Exchange   |   Manufacturer List
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com