Avance Logic Inc.
ALS300
39
#D5h
pause BX type DMA mode transfer
ESP_WRITE(D5h)
The DMA request is stopped after this command. Internal FIFO will continue until the FIFO is empty
(playback) or full (record). The DMA request will resume after command D6h or any of new DMA
command is issued
#D6h
resume BX type DMA mode transfer
ESP_WRITE(D6h)
The DMA request that is suspended by the command D5h is enable again. The internal FIFO is working
as usual in pause or resume DMA mode. This command is no use to non-BX type command DMA
transfer.
D8h
get digital audio status
a. ESP_WRITE(D8h)
b. ESP_READ(status)
c. Status = 00h (digital audio off) or FFh (digital audio on)
#D9h
exit current BX type continuous DMA transfer
ESP_WRITE(D9h)
Causes the ESP to finish the current block, then cease transferring. Use this command while the DMA is
transferring the last block of audio data from/to ESP. ESP-RESET() or any of new DMA command
should reset this flag.
DAh
exit current non-BX type continuous DMA transfer
ESP_WRITE(DAh)
Causes the ESP to finish the current block, then cease transferring. Use this command while the DMA is
transferring the last block of audio data from/to ESP. ESP-RESET() or any of new DMA command
should reset this flag.
ESP Version And Diagnostic
EXh
*E0h
read/write diagnostic test
a. ESP_WRITE(E0h)
b. ESP_WRITE(test-data)
c. ESP_READ(result)
d. If result = bit invert of test-data, ESP is working
E1h
get ESP version number
a. ESP_WRITE(E1h)
b. ESP_READ(major.version)
c. ESP_READ(minor.version)
Sound Blaster Pro default version
3.02
Sound Blaster 16 default version
4.02
ALS300 default 4.02
English ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
