24PC datasheet(40/73 Pages) HONEYWELL

40 / 73 page

www.honeywell.com/sensing

THERMAL CUTOFFS

Thermal Cutoffs include products for use in a wide array of small

appliances, major appliances, office copy machines, automotive, and

HVAC equipment. These devices are available in various lead lengths and

configurations.

NOTE: The products in this section do not follow the “how to use this

catalogue” instructions provided in the catalogue introduction. Specific

reference numbers are not given due to their custom nature. Please

contact your local Honeywell sales office for ordering information.

Thermal Cutoffs

DXXX-002

35,05

[1.380]

46,74

[1.840]

81,79

[3.220]

3,99

[0.157]

TIN-PLATED

18 AWG 1,02 [0.040]

COPPER WIRE

SILVER-PLATED

18 AWG 1,02 [0.040]

COPPER WIRE

SILVER-PLATED

BRASS CASE

11,61 REF.

[0.457]

D Series

The D Series responds to temperature by interrupting an electrical circuit

when the operating and/or environmental temperature exceeds the

thermal rating of the fuse. This is accomplished when the organic pellet

experiences a phase change, allowing the spring activated contacts to

permanently open the circuit.

Operating temperature range:

72 °C to 240 °C [162 °F to 464 °F]

Environmental exposure range:

see notice

DXXX-001

11,61 REF.

[0.457]

SILVER-PLATED

BRASS CASE

29,21

[1.150 ]

35,05

[1.380 ]

64,26

[2.530]

3,99

[0.157]

TIN-PLATED

18 AWG 1,02 [0.040]

COPPER WIRE

SILVER-PLATED

18 AWG 1,02 [0.040]

COPPER WIRE

DXXX-003

69,09

[2.720]

35,05

[1.380]

34,04

[1.340]

11,61 REF.

[0.457]

3,99

[0.157]

SILVER-PLATED

18 AWG 1,02 [0.040]

COPPER WIRE

TIN-PLATED

18 AWG 1,02 [0.040]

COPPER WIRE

SILVER-PLATED

BRASS CASE

NOTICE

• To maximize product life, use a 30 °C [86 °F] min. differential

between the operating ambient temperature at the fuse location

and the specified functioning temperature of the fuse being used.

Maintain a 40 °C [104 °F] min. differential between devices with

functioning temperatures above 200 °C [392 °F].

• Under no condition should the thermal cutoff be exposed to a

continuous normal temperature rating in excess of 200 °C

[392 °F]. Only proper testing of the above will determine the

selected thermal cutoff’s suitability within the application.

NAME

DXXX-001

NAME

DXXX-002

NAME

DXXX-003

24PC Datasheet(PDF) 40 Page - Honeywell Solid State Electronics Center

24PC Datasheet(HTML) 40 Page - Honeywell Solid State Electronics Center

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73

Datasheet Download

Link URL